Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR
THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
3
Employ all workshop safety rules, regulations, and conditions when using wrench.
p
WARNING!
Disconnect from air supply before changing accessories or servicing.
3
Maintain the
wrench in good condition and replace any damaged or worn parts.
Use
genuine parts only. Non-authorised parts may be dangerous and will invalidate the warranty.
p
WARNING!
Check correct air pressure is maintained and not exceeded. Recommended 70-90psi
3
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
3
Only use impact sockets which are specifically designed for use with an impact wrench.
3
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3
Wear approved eye and hand safety protection.
3
Keep children and unauthorised persons away from the working area.
7
DO NOT
use the wrench for a task it is not designed to perform.
p
WARNING! DO NOT
use wrench if damaged or thought to be faulty. (Contact Service Agent).
7
DO NOT
use wrench unless you have been instructed in its use by a qualified person.
7
DO NOT
drop, throw or abuse the wrench as it is a precision tool.
7
DO NOT
carry the wrench by the hose, or yank the hose from the air supply.
7
DO NOT
operate wrench if you are tired, under the influence of alcohol, drugs or intoxicating medication.
7
DO NOT
carry wrench with your hand on the trigger in order to avoid unintentional starting.
7
DO NOT
direct air from the air hose at yourself or others.
3
When not in use, disconnect from air supply and store in a safe, dry, childproof location.
2. INTRODUCTION & SPECIFICATION
MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SA204
Drive sizes . . . . . . . . . . . . . . . . . . . 3/8”Sq, 3/8”Sq Universal Joint, 1/2”Sq and 6mm Bit Adaptor
Max torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45ft/lb
Air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6cfm
Operating pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90psi
Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4”BSP
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.17kg
Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260mm
Noise Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90.8dBA
Noise Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101.8dBA
Air powered ratchet wrench supplied with four adaptors, 3/8”Sq Drive, 3/8”Sq Drive Universal
Joint, 1/2”Sq Drive and 6mm bit adaptor. Adaptors provide for a variety of workshop applications,
particularly where space is limited in and around the engine bay. Features hardened steel anvil,
twist-reverse mechanism and heavy-duty aluminium housing. Includes four 6mm screwdriver bits.
Supplied in tough blow moulded case.
Original Language Version
SA204 Issue: 1 - 19/08/11
INSTRUCTIONS FOR:
AIR RATCHET WRENCH 4-IN-1
DRIVE
MODEL No:
SA204
