Pressure Washer submersible PumP
in Carry Case 12V
Model no:
PW12CC
Thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safeTy
1.1.
eleCTriCal safeTy (WiTh resPeCT To mains Chargers)
Warning!
It is the user’s responsibility to check the following:
9
You must check the AC adaptor to ensure that it is safe before using. You must inspect the power supply lead, plugs and all electrical
connections for wear and damage. You must ensure the risk of electric shock is minimised by the installation of appropriate safety
devices. A RCCB (Residual Current Circuit Breaker) should be incorporated in the main distribution board. We recommend that
an RCd (Residual Current device) is used with all electrical products. It is particularly important to use an RCd with portable
products that plug into an electrical supply not protected by an RCCB. If in doubt consult a qualified electrician. You can obtain a
Residual Current device through your Sealey stockist. You must read and understand instructions concerning electrical safety.
9
The Electricity At Work Act 1989 requires all portable electrical appliances, if used on business premises, to be tested by a qualified
person, using a Portable Appliance Tester (PAT ), at least once a year.
9
The Health & Safety at Work Act 1974 makes owners of electrical appliances responsible for the safe condition of the appliance and
the safety of the appliance operator. If in any doubt about electrical safety, contact a qualified electrician.
9
ensure that the insulation on all cables and the product itself is safe before connecting to the mains power supply.
9
ensure that cables are always protected against short circuit and overload.
9
Regularly inspect power supply, leads, plugs for wear and damage and power connections to ensure that none is loose.
9
Check product voltage is the same as power supply to be used.
1.2.
general safeTy
9
The operator must use the machine in accordance with the regulations. The local conditions must be taken into account. When
working, pay attention to other people, especially to children.
9
The operator is responsible for third parties in the work area.
Do noT
accidentally direct the jet against other persons or animals in
the area.
9
All current-conducting components in the work area must be protected against splashed water.
9
The machine must be placed on a stable surface.
8
Do noT
use solvent-containing liquids, undiluted acids, acetone or solvents, including petrol, paint thinners, heating oil. The
sprayed vapours are highly flammable, explosive and toxic.
8
Never use with the filter removed or if the filter is damaged.
8
Do noT
modify the machine. Unauthorized modifications can impair the safety of your machine, lead to increased noise and
vibrations, and poor performance.
9
High pressure may cause objects to rebound. If necessary wear suitable personnel protective equipment such as safety goggles.
9
Use only fresh (not saline) water.
Warning!
Do noT
use the washer if any part of the unit, gun, nozzle, detergent bottle, hose or cables is damaged. Replace or
repair using genuine parts only. Unauthorised parts may be dangerous and will invalidate your warranty. Always check connections
are correctly secured and not cracked or damaged in any way before using the machine.
9
Always be aware of the potential hazards that may occur during use. Study the applications and limitations of the washer before use.
9
Keep the washer in good condition. Use an authorised agent to service the unit.
9
Wear adequate protective clothing, goggles and anti-slip rubber soled footwear.
9
Use where air can freely circulate around the washer to avoid the machine over-heating.
Warning!
ensure all persons and animals keep at a minimum distance of 15mtr from the washer when in use.
Warning!
The pressure washer must only be used with clean water. Non-filtered water or corrosive chemicals must not be used as
they will damage the cleaner.
9
Release residual pressure before disconnecting hose.
9
ensure the nozzle is aimed correctly at the working surface before activating the jet.
Warning!
The high pressure jet will cause loose particles to be propelled at high speed, which may cause serious injury.
Warning!
Do noT
use the washer on any material containing asbestos as this may release hazardous asbestos particles into the
atmosphere.
8
Do noT
touch charger with wet hands, to avoid the risk of electrocution. Keep all connections dry and off the ground.
8
Do noT
direct jet against yourself, other persons or animals, electrical equipment or the machine itself.
8
Do noT
use washer if you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
Do noT
use the washer with flammable or toxic liquids or any other product. Only use recommended detergent. Non-recommended
detergents may corrode the machine cover and accessories.
8
Do noT
connect other appliances to the machine inlet or outlet.
PW12CC Issue 1 13/12/18
Original Language Version
© Jack Sealey limited
Refer to
instructions
electrical shock
hazard
Wear eye
protection
Wear protective
gloves
Wear safety
footwear
Wear protective
clothing
