
Detector
Transmitter
Operating Conditions:
0°C ~ 40°C <80% RH
0°C ~ 40°C <80% RH
Frequency Response:
40kHz +/- 2kHz
-
Output Frequency:
-
40kHz
Battery:
9V
9V
Size:
192 x 50 x 30mm
80 x 56 x 27.5mm
Weight:
115g (incl battery)
75g (incl battery)
1.1.
GENERAL SAFETY INSTRUCTIONS
1.1.
Familiarise yourself with the application, limitations and potential hazards of the tester.
Also refer to the vehicle manufacturer’s hand
book.
1.2.
Ensure that the tester is in good condition before use.
1.3.
Only use recommended attachments and parts. To use unapproved items may be dangerous and will invalidate your warranty.
1.4.
If the tester receives a sharp knock or blow the unit must be checked by a qualified service agent before using.
1.5.
Keep children and unauthorised persons away from the work area.
DO NOT
disassemble the tester for any reason. The tester must only be checked by qualified service personnel.
WARNING!
To avoid damaging hearing,
DO NOT
set headphones volume too high.
DO NOT
drop the detector or transmitter.
DO NOT
tamper with the electronic circuit boards within the dectector or transmitter.
DO NOT
use the tester outdoors, or in damp, or wet locations and
DO NOT
use in the vicinity of flammable liquids or gases.
DO NOT
use the dectector or transmitter near any electrical appliances which emit electromagnetic waves, as this will give a false
reading.
DO NOT
use the tester for a task for which it is not designed.
1.6.
When not in use, store the tester carefully in a safe, dry, childproof location.
1.7.
If the dectector and transmitter are not to be used for long periods, remove the batteries before storing.
InsTRuCTIOns FOR:
ULTRASONIC LEAk DETECTOR
mOdEl no:
PP4.V2
Thank you for purchasing a sealey product. manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
1. SAFETY INSTRUCTIONS
2. INTRODUCTION & SPECIFICATION
Quick and simple location of air, water or dust leaks. Place the transmitter in the vehicle and close the doors and windows. Trace the detector
around outside of the screen, windows and door seals to locate the leak. Includes adjustable headphones for detector. Transmitter and
detector powered by 9V batteries. supplied in carry-case.
PP4.V2 Issue no: 3(I) - 14/03/16
Original Language Version
© Jack sealey limited
Refer to
Instruction
manual
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.