Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
INSTRUCTIONS FOR:
AIR TYRE BUFFING KIT
MODEL No:
SA92.V2
2.
INTRODUCTION & SPECIFICATIONS
Chuck size . . . . . . . . . . . . . . . . . 10mm
Air inlet size . . . . . . . . . . 1/4” BSP
Operating pressure . . . . . . . . . . . . 90psi
Air consumption . . . . . . . . . . . 5cfm
Weight . . . . . . . . . . . . . . . . . . . 0 .76kg
Free speed . . . . . . . . . . . 20000rpm
Composite cased air motor with selection of 6mm shanked grinding points, 10mm drill chuck and
tyre buffing cone . Kit also includes spanners, chuck key and air hose adaptors .
Follow all workshop safety rules, regulations, and conditions when using the buffing kit .
WARNING!
Disconnect from air supply before changing accessories or servicing .
Maintain the
buffing kit in good condition and replace
any damaged or worn parts .
Use genuine parts only.
Unauthorised parts may be dangerous and will
invalidate the warranty.
WARNING!
Check correct air pressure is maintained
and not exceeded . We recommend 90psi .
Keep air hose away from heat, oil and sharp edges .
Check air hose for wear before each use and ensure
that all connections are secure .
Wear approved safety eye/face shield, ear defenders,
and hand protection .
WARNING!
Due to the possible presence of asbestos
dust from brake linings, when working around vehicle brake systems we recommend you wear
suitable respiratory protection .
Maintain correct balance and footing . Ensure the floor is not slippery and wear non-slip shoes .
Keep children and non essential persons away from the working area .
DO NOT use the buffing kit for a task it is not designed to perform .
WARNING! DO NOT
use buffing kit if damaged or thought to be faulty . (Contact Service Agent) .
DO NOT use buffing kit unless you have been instructed in its use by a qualified person .
DO NOT carry the buffing kit by the air hose, or yank the hose from the air supply .
DO NOT operate buffing kit if you are tired or under the influence of alcohol, drugs or
intoxicating medication .
DO NOT carry buffing kit with your hand on the power trigger in order to avoid unintentional
starting .
DO NOT direct air from the air hose at yourself or others .
When not in use disconnect from air supply and store in a safe, dry, childproof location .
Original Language Version
SA92 .V2 Issue: 2 - 13/11/09
