background image

INSTRUCTIONS FOR:

20LTR WET AND DRY VACUUM CLEANER 1250W

MODEL No: 

PC195SD

1.1 

ELECTRICAL SAFETY

  

WARNING!

 It is the responsibility of the owner and the operator to read, understand and comply with the following:

You must check all electrical products, before use, to ensure that they are safe. You must inspect power cables, plugs, sockets and any other 

connectors for wear or damage. You must ensure that the risk of electric shock is minimised by the installation of appropriate safety devices. A 

Residual Current Circuit Breaker (RCCB) should be incorporated in the main distribution board. We also recommend that a Residual Current 

Device (RCD) is used. It is particularly important to use an RCD with portable products that are plugged into a supply which is not protected 

by an RCCB. If in any doubt consult a qualified electrician. You may obtain a Residual Current Device by contacting your Sealey dealer. 

You must

 also read and understand the following instructions concerning electrical safety.

1.1.1 The 

Electricity at Work Act 1989 

requires that all portable electrical appliances, if used on business premises, are tested by a  

 

 

qualified electrician, using a Portable Appliance Tester (PAT), at least once a year.

1.1.2 The 

Health & Safety at Work Act 1974 

makes owners of electrical appliances responsible for the safe condition of those appliances  

 

and the safety of the appliance operators. 

If in any doubt about electrical safety, contact a qualified electrician.

1.1.3  Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply. See 1.1.1. and 1.1.2.    

 

and use a Portable Appliance Tester.

1.1.4  Ensure that cables are always protected against short circuit and overload.

1.1.5  Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that none are loose.

1.1.6 

Important:

 Ensure that the voltage marked on the appliance matches the power supply 

 

to be used and that the plug is fitted with the correct fuse - see fuse rating at right.

1.1.7 

DO NOT

 pull or carry the appliance by the power cable.

1.1.8 

DO NOT 

pull the plug from the socket by the cable.

1.1.9 

DO NOT

 use worn or damaged cables, plugs or connectors. Immediately have any faulty 

 

item repaired or replaced by a qualified electrician. When a BS 1363/A UK 3 pin plug is  

 

damaged, cut the cable just above the plug and 

dispose of the plug safely. 

 

Fit a new plug according to the following instructions (UK only).

 

a)  Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’.

 

b)  Connect the BROWN live wire to the live terminal ‘L’.

 

c)  Connect the BLUE neutral wire to the neutral terminal ‘N’.

 

d)  After wiring, check that there are no bare wires, that all wires have been correctly  

 

connected, that the cable outer insulation extends beyond the cable restraint and that  

 

the restraint is tight.

 

Double insulated products, which are always marked with this symbol     , are fitted with live  

 

(brown) and neutral (blue) wires only. To rewire, connect the wires as indicated above - 

DO NOT

 connect either wire to the earth terminal. 

1.1.10  Products which require more than 13 amps are supplied without a plug. In this case you must contact a qualified electrician to ensure  

 

that a suitably rated supply is available. We recommend that you discuss the installation of an industrial round pin plug and socket    

 

with your electrician.

1.1.11  If an extension reel is used it should be fully unwound before connection. A reel with an RCD fitted is preferred since any appliance    

 

plugged into it will be protected. The cable core section is important and should be at least 1.5mm², but to be absolutely sure that the  

 

capacity of the reel is suitable for this product and for others which may be used in the other output sockets, we recommend the use   

 

of 2.5mm² section cable.

1.2 

GENERAL SAFETY 

 

Disconnect the cleaner from the power supply before servicing, changing accessories, or performing any maintenance.

 

Use only genuine parts and accessories. Unauthorised parts and accessories may be dangerous and will invalidate your warranty.

 

Maintain the cleaner in good condition. Use an authorised agent for servicing. Keep machine clean, but 

DO NOT

 use solvents.

 

For dry vacuuming ensure the cartridge filter is firmly in place before operating the cleaner.

 

DO NOT

 operate the unit without the cartridge filter in place (except when wet vacuuming). 

Using the cleaner without a cartridge filter  

 

may cause damage to the vacuum cleaner and will invalidate your warranty.

 

 

 

Wear protective clothing and gloves. 

 

DO NOT

 place attachments close to your face (especially eyes, ears, etc). 

DO NOT 

point the hose end at other persons or animals.

  DANGER! DO NOT

 vacuum hot or glowing ash, cigarette ends, inflammable, explosive, corrosive or other dangerous substances.

 

DO NOT

 operate the unit without the dust bag or optional cartridge filter (except when wet vacuuming). 

 

DO NOT

 leave machine running unattended. Turn power supply OFF, and 

DO NOT 

leave the vicinity until motor has come to a complete stop.   

 

DO NOT

 operate the cleaner while under the influence of drugs, alcohol or impairing medication, or if you are tired. 

 

DO NOT

 use the cleaner in the rain or in very damp conditions. 

 

DO NOT

 use the cleaner for a task it is not designed to perform. 

 

When not in use, store the cleaner in a safe, dry, childproof location.

 NOTE:

 This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental

 

capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a

 

safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be

 

made by children without supervision.

RECOMMENDED FUSE RATING

13 AMP

Original Language Version

PC195SD     Issue No.1    24/07/14

© Jack Sealey Limited

IMPORTANT:

 

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE 

PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

 1.  SAFETY

Summary of Contents for PC195SD






Reviews: