RechaRgeable 360° 7smd + 3W led
InspectIon lamp lIthIum-Ion
Model no:
led3602.V3 seRIes
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
9
Inspect the cable and connector for wear and damage to ensure items are safe before connecting to the power supply. If worn or
damaged
do not
use.
9
ensure the lamp is fully charged before initial use.
8
do not
charge in damp conditions.
8
do not
turn the lamp on when it is being charged.
8
do not
shine directly into your, another person’s or an animal’s eyes.
8
do not
allow children to use the lamp.
8
do not
handle or move the lamp whilst it is being charged.
8
do not
use the lamp if you suspect that the battery or the lamp casing is damaged.
8
do not
leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently
recharge the battery at least once every six months of non-use.
8
do not
attempt to open, disassemble, modify or service the battery pack.
8
do not
crush, puncture, short external contacts or dispose of in fire or water.
8
do not
expose to temperatures above 60°C (140°).
9
Replace only with the battery pack designated for this product.
9
Recycle or dispose of used battery as stipulated by local regulation.
9
If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with
cool water and seek immediate medical attention.
2. IntRoductIon
Unique and innovative 360° swivel and tilt function enables the light source to be positioned in any direction. exclusive patented design
o
wned by and registered to Sealey. Seven super bright SMD LEDs with magnified lens providing up to 400 lumens output with 120° spread
of light, illuminating the whole work area. Includes an additional high power 3W led directional torch. Features two swivel hooks and three
rubber covered magnets, two on the rear and one on the end, which allow hands-free operation. High quality 2.2Ah Lithium-ion battery for
longer life, no memory effect and a much slower discharge than traditional Ni-MH batteries. Micro USB charging port. Supplied with USB cable.
3. specIfIcatIon
model no:
..............................................
led3602.V3 series
Battery: ......................................................
3.7V 2.2Ah Li-Ion
led Quantity:.................................................. 7SMd + 1led
lumen output Side(High/low)/Top: .............
(400/200)/120lm
operating Time Side(High/low)/Top: ........................ (3/7)8hr
Charging Time: ...............................................................3.5hr
IP Rating: ........................................................................IP54
Minimum length: .......................................................
255mm
Maximum length: ......................................................
270mm
ImpoRtant WaRRanty InfoRmatIon
The battery fitted to this lamp is considered to be a consumable item and its ability to accept a charge will reduce over time.
We will provide warranty against mechanical and electrical defect for a period of one year - this does not cover fair wear and tear.
If the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish.
Under these circumstances we will not replace the battery regardless of whether the battery less than one year old.
l
ED3602.V3 SERIES Issue 2 12/06/18
Original Language Version
© Jack Sealey limited
Refer to
instructions
