2-WAY LADDER STAND-OFF
MODEL NO:
LAD004
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
I
MP
PO
R
RTA
TANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
TH
HE
P
PR
O
ODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PE
ER
S
SON
NAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
▲
DANGER
!
Take care when using or moving ladders in the vicinity of power cables - risk of potentially fatal electric shock.
WARNING!
Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using the
2 way ladder stando
ff
.
Familiarise yourself with the application and limitations of the 2 way ladder stando
ff
, as well as all potential hazards.
Maintain the 2 way ladder stando
ff
in good condition.
Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
DO NOT
use the 2 way ladder stando
ff
if any parts are damaged or missing. This may cause failure and/or personal injury.
WARNING!
Use the ladder on level ground. Anchor the ladder’s lowest rung and if possible secure the top of the ladder to prevent
any
slippage.
When viewed from the front, the top of the ladder section(s) must always be directly above the base.
Place the ladder at an angle of 75º. Use the 1 in 4 rule (one unit out for every four units up).
DO NOT
rest the 2 way ladder stando
ff
against weak surfaces such as glazing or plastic guttering.
WARNING!
Never overreach, maintain 3 points of contact to the ladder.
Keep children and unauthorised persons away from the working area.
DO NOT
use the 2 way ladder stando
ff
for any purpose other than that for which it is designed.
DO NOT
allow children to climb the ladder.
DO NOT
work o
ff
ladders when you are tired or under the in
fl
uence of alcohol, drugs or intoxicating medication.
When not in use store in a safe, dry, childproof area.
2. INTRODUCTION
Heat treated aluminium framed ladder stand-o
ff
improves stability and
fi
ts to any ladder. The “V” Type design can be used on
fl
at surfaces,
corners or over down pipes. Fitted with rubber feet to prevent slipping and positions ladder 250-400mm away from wall. Quick and easy to
assemble.
3. SPECIFICATION
Model No: ................................................................. LAD004
Maximum capacity: .......................................................110kg
Span width: ................................................................ 700mm
Stando
ff
: ............................................................. 250-400mm
4. CONTENTS
LAD004 Issue 2 (H,F) 01/11/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
ITEM
DESCRIPTION
QTY
1
Standoff frame
1
2
Brace
1
3
Hook brackets
2
4
Hooks
4
5
Spring
1
6
Bolt M6 x 35mm
2
7
Bolt M6 x 30mm
2
8
Bolt M6 x 25mm
4
9
M6 Flat washer
8
10
M6 Hex nut
8
