INSTRUCTIONS FOR
HVLP GRAVITY FEED SPRAY GUN 1.4mm SET-UP
MODEL NO:
HVLP01
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1. SAFETY
WARNING!
Disconnect the spray gun from the air supply before changing accessories, servicing or performing any maintenance.
9
Familiarise yourself with this products application and limitations, as well as the specific potential hazards peculiar to the spray gun.
Paint cup remains pressurised after gun is disconnected from air line.
9
DO NOT
pull the trigger, but release the pressure by gently opening cup.
9
Maintain the spray gun in good condition (use an authorised service agent). Replace or repair damaged parts.
9
Use recommended parts only. Non authorised parts may be dangerous and will invalidate the warranty.
9
Locate the spray gun in an adequate working area for its function, keep area clean and tidy and free from unrelated materials, and
ensure there is adequate ventilation and lighting.
9
Keep the spray gun clean for best and safest performance.
9
Ensure the air system is suitable to the spray gun air consumption, (see specifications).
9
Remove ill fitting clothing. Remove ties, watches, rings, and other loose jewellery, and tie back long hair.
9
Keep children and unauthorised persons away from the working area.
8
DO NOT
point spray gun at yourself, at other persons or animals.
8
DO NOT
carry the by the air hose, or pull the hose from the air supply.
8
DO NOT
use the spray gun for any purpose other than for which it is designed.
8
DO NOT
allow untrained persons to operate the spray gun.
8
DO NOT
get the spray gun wet or use in damp or wet locations or areas where there is condensation.
8
DO NOT
operate gun if any parts are missing or damaged as this may cause failure or personal injury.
8
DO NOT
direct air from the air hose at yourself or others.
9
Avoid unintentional operation. When not in use switch the spray gun off, and disconnect from the air supply.
2. INTRODUCTION
G
ravity feed spray gun designed for applying base coats. Features air and paint flow controls for fine adjustment of spray pattern. HVLP
Technology and precision engineering delivers consistent and unrivalled results. Suitable for water based paints.
3. SPECIFICATION
Model No ...................................................................
HVLP01
Standard Set-Up .........................................................
1.4mm
Available Set-Up ...................................................
1.3/1.7mm
Recommended Air Pressure ....................................
30-43psi
Air Consumption........................................................
14.5cfm
Pot Capacity..................................................................
600m
4. CONTENTS
ITEM
DESCRIPTION
Qty
1
Gun
1
2
1.4 Gun Head (MAX 10psi)
1
3
P
ot (600ml)
1
4
Strainer
1
5
Universal Spanner
1
6
Brush (A)
1
7
Brush (B)
1
HVLP01 | Issue 2 (H,F)30/01/18
© Jack Sealey Limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Wear safety
footwear
Wear protective
clothing
Wear a mask
fig.2
