Battery Removal
Remove the two screws on the back of the battery unit, remove the lid and cut the two wires to remove the battery.
Dispose of it according to local government guidelines.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to
inform potential purchasers of products containing batteries (as defined within these regulations), that they are
registered with Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number
(BPRN) is BPRN00705.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
4.1
Before the unit is disposed of at the end of its life, it is a requirement that the battery is removed. Refer to the battery removal section below.
4. MAINTENANCE
3. OPERATION INSTRUCTIONS
3.1.
CHARGING
3.1.2. To charge remove the lead from the head torch and plug in the charger lead. Remember to plug the lamp lead back in after charging.
3.2
OPERATION
3.2.1. Adjust the three straps to fit your head size.
3.2.2. To turn on press the orange button on the back of the torch unit, once for brightest, again for low light and again for flashing and once
more to turn off.
NOTE:
The torch will not operate whilst being charged.
Hands free CREE LED spotlight with adjustable inclination to direct light as required. Features three settings: full light, low light or flashing.
Adjustable headband and foam brow for added comfort. Powered by rechargeable 3.7V 2.0Ah Li-ion battery. Supplied with mains charger.
Model No:
.............................................................................
HT105LED.V2
Cell Type:
..........................................................................3.7V 2.0Ah Li-ion
Lumen Output:
...................................................................................120lm
LED:
............................................................................................. 3W CREE
Operating Time:
....................................................................................3hrs
Charging Time:
.....................................................................................4hrs
2. INTRODUCTION
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
WEEE Regulations.
Dispose of this product at the end of its working life in compliance
with the EU Directive on Waste Electrical and Electronic Equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. Contact your local solid waste
authority for recycling information.
Parts support is available for this product. to obtain a parts listing and/or diagram, please log on to www.sealey.co.uk,
email: [email protected] or telephone: 01284 757500.
Original Language Version
© Jack Sealey Limited
HT105LED.V2 Issue: 1 - 29/03/16
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
