galvanised steel shed 3 x 3 x 2.2M
Model no:
gss3030/g.v3
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
WaRning!
ensure Health & Safety, local authority, and general workshop practice regulations are adhered to
when building this shed.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep children and unauthorised persons away from the working area.
8
dO nOt
use the shed for any purpose other than that for which it is designed.
Use appropriate safety clothing including eye protection.
nOte!
The assembly of this product will require assistance.
2. intROductiOn
Galvanized steel panels easily screw and rivet together to form a rigid and secure structure. Features an apex style roof which gives
extra water run off. Double door fitted with cross bolt and eyelet that accepts padlock (not included) for additional security. Supplied
with bolt down kit for secure fixing.
3. specificatiOn
MOdel no
....................................................
gss3030/g.v3
Colour........ ........................................ ..........................Green
Roof type........................................................................Apex
doors................ ...................................................................2
o
verall size (WxDxH) ...........
............3000 x 3000 x 2200*mm
*Minimum wall height
4. asseMbly
GSS3030G.V3 Issue 1 24/12/19
Original Language Version
© Jack Sealey limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Wear safety
footwear
Wear protective
clothing
tools required
drill
Measuring tape
Cross head screw driver
Rivet gun
Rubber mallet
Sturdy ladder
Adjustable spanner
2 Saw horses
3mm and 4mm drill
10mm Masonry drill
