background image

5.9.    

STEP 6 (FIG.10)

5.9.1. 

  

Carefully move the assemble product to the wall where you want it to stay, then use Anchorage Clip (fig.9.8) and Expansion Bolt    

 

(fig.10.17) fix it to the wall.

5.9.2. 

  

Then you can latch it to the ground using the stakes (fig.10.7).

6.  MAINTENANCE

 

8

  

DO NOT

 use bleach, alkaline or harsh detergents for cleaning. Doing so will damage the polyethylene material. Soap and warm    

  water are recommended.

 fig.10

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice.

Important

: No Liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

FGE01 Issue 1 25/11/2020

Original Language Version

© Jack Sealey Limited

Summary of Contents for FGE01







Reviews: