background image

INSTRUCTIONS FOR:

PORTABLE DIESEL TANK 12V

430ltr

PART NO: 

D43012V

IMPORTANT:

 

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.  USE THE PRODUCT 

CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL 

INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions 

and maintained properly, give you years of trouble free performance.

Refer to 

Instruction Manual

Wear Protective

Gloves

 1.  SAFETY

 

WARNING:

 this tank must

 ONLY

 be used for diesel fuel.

 

Place the tank on a

 

flat surface before filling.

 

Secure the tank to strong points with ratchet straps before transporting in or on a vehicle.

 

Maintain the pump in good condition (use an authorised service agent).

  Replace or repair damaged parts. 

Use recommended parts only. Non authorised parts may be dangerous and will invalidate the warranty.

  Keep the pump clean for best and safest performance.

 

Ensure the power supply (vehicle battery) corresponds with the requirements of the pump (12V dc). 

 

Disconnect from battery when not in use.

 

 

Wear protective gloves, and protective clothing when working around fuel. A full range of personal safety equipment is available from your  

  local Sealey dealer.

  Keep children and unauthorised persons away from the working area.

 

DO NOT 

place the tank near any heat source.

 

DO NOT

 start or stop the pump by connecting or disconnecting the battery clamps.

 

DO NOT 

allow the unit to get  wet.

 

DO NOT

 operate the pump with wet hands.

 

DO NOT

 use the pump where explosive or flammable vapours may be present.

 

DO NOT

 tamper with the pump connections.

2.   INTRODUCTION

  3.   SPECIFICATION

 

Model No:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D43012V

 

Voltage:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12V

 Current:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22A

 Power:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140W

 

Tank Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . .430ltr

 

Flow Rate: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40ltr/min

 

Dimensions (L x W x H):  . . . . . . . . . . . . . . . . . . .1180 x 780 x 770mm

 

Lockable Cover:. . . . . . . . . . . . . . . . . . . . . . . . . .Yes

Key:

1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Filler Cap

2 . . . . . . . . . . . . . . . . . . . . . . . .Contents Gauge

3 . . . . . . . . . . . . . . . . . . . . . . . . .  Security Valve

4 . . . . . . . . . . . . . . . . . . . .  Pump On/Off Switch

5 . . . . . . . . . . . . . . . . . . . . .Battery Clip Storage

6 . . . . . . . . . . . . . . . .Dispenser Nozzle Storage

7 . . . . . . . . . . . . . . . . .Securing Strap Locations

fig.1

    Original Language Version 

© Jack Sealey Limited

Manufactured in Italy from HDPE for the safe transportation and dispensing of diesel fuel when supplying on site equipment. Complies to ADR 

1.1.3.1.C for exemption from requirements of ADR regulations. Supplied with a 12V electric pump, 4mtr electric cable and clamps, security valve 

and a 4mtr delivery hose with automatic fuel nozzle. Can be safely transported on a pick-up truck or van, with forklift points and 6 handles for 

positioning. Supplied with a lockable cover. Not suitable for petrol.

    D43012V       Issue: 1 -  09/02/16

Reviews: