background image

 8V CORDLESS GREASE GUN

MODEL NO: 

CPG8V

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 
instructions, and properly maintained, give you years of trouble free performance.

I

MP

PO

R

RTA

TANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

TH

HE

P

PR

O

ODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PE

ER

S

SON

NAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

1.1.   

ELECTRICAL SAFETY FOR USE OF CHARGER

 

 

USE ONLY THE SUPPLIED CHARGER PLUG FOR CONNECTING THE 8V CORDLESS GREASE GUN TO THE POWER SUPPLY

WARNING! 

It is the user’s responsibility to read, understand and comply with the following instructions:

 

  You must ensure the risk of electric shock is minimised by the installation of appropriate safety devices. An RCCB (Residual Current  

 

  Circuit Breaker) should be incorporated in the main distribution board. We also recommend that an RCD (Residual Current Device) is  

 

  used with all electrical products, particularly portable equipment which is plugged into an electrical supply not protected by an RCCB.  

 

 

YOU MUST

 also read and understand the following instructions concerning electrical safety.

1.1.1. 

The Electricity At Work Act 1989

 requires all portable electrical appliances, if used on business premises, to be tested by a  

 

 quali

fi

 ed electrician, using a Portable Appliance Tester (PAT), at least once a year.

1.1.2. 

THE Health & Safety at Work Act 1974

 makes owners of electrical appliances responsible for the safe condition of the appliance  

 

and the safety of the appliance operator. 

If in any doubt about electrical safety, contact a quali

fi

 ed electrician.

1.1.3.   

You must ensure that you:

Inspect the charger plug, cable and connector for wear and damage to ensure items are safe before connecting to the power supply.

DO NOT

 use if worn or damaged.

 

 

IMPORTANT:

 Check that the voltage marked on the charger plug is the same as the power supply to be used.

DO NOT

 pull the charger plug from the mains socket by the lead.

DO NOT

 use any other type of charger with this product.

DO NOT

 try to take the charger apart.

DO NOT

 use the charger plug to charge or power any other electrical item.

DO NOT

 get the charger wet, or use in wet, damp conditions (for indoor use only).

WARNING! NEVER

 substitute a standard 13amp 3 pin plug, or any other type of plug, for the charger plug.

1.2. BATTERY 

SAFETY

WARNING!

 To reduce the risk of burns or 

fi

 re:

DO NOT

 attempt to open, dismantle, modify or service the battery.

DO NOT

 crush, puncture, short external contacts or dispose of in 

fi

 re or water.

DO NOT

 expose to temperatures above 60ºC (140ºF).

   Recycle or dispose of used battery as stipulated by local regulation.

1.3.   GENERAL 

SAFETY

WARNING!

 Disengage the grease gun from the battery before changing accessories, servicing or performing and maintenance.

   Maintain gun in good condition (use an authorised service agent).

   Replace or repair damaged parts. Use recommended parts only. Unauthorised parts may be dangerous and will invalidate the  

 

 warranty.

   Wear appropriate protective clothing. When handling lubricants refer to manufacturer’s instructions and conform to local regulations.

   Use the gun in a suitable working area. Keep area clean and tidy and free from unrelated materials and ensure there is adequate    
 lighting.

   Maintain correct balance and footing whilst performing the task. Ensure floor is not slippery and wear non-slip shoes.

   Keep children and unauthorised persons away from the work area.

   Dispose of waste grease in accordance with local authority regulations.

   When not in use ensure the battery is removed.

DO NOT

 allow unauthorised persons to operate the gun.

WARNING! DO NOT

 tamper with or open pump unit. Doing so will invalidate your warranty.

DO NOT

 point grease gun at yourself or other persons or animals.

DO NOT

 pull the grease gun unit by the hose.

DO NOT

 use the gun for a task it is not designed to perform.

DO NOT

 operate the gun when you are tired or under the influence of alcohol, drugs or intoxicating medication.

   When not in use, clean the unit and store in a dry, safe, childproof area.

CPG8V  Issue 3 13/09/21

Original Language Version

© Jack Sealey Limited

Refer to 

instructions

Wear eye 

protection

Wear protective 

gloves

Summary of Contents for CPG8V

Page 1: ... to be used DO NOT pull the charger plug from the mains socket by the lead DO NOT use any other type of charger with this product DO NOT try to take the charger apart DO NOT use the charger plug to charge or power any other electrical item DO NOT get the charger wet or use in wet damp conditions for indoor use only WARNING NEVER substitute a standard 13amp 3 pin plug or any other type of plug for ...

Page 2: ... the sides of the battery 4 2 2 Insert a fully charged battery into the battery cavity in the grease gun handle The battery release buttons will click when the battery is fully inserted NOTE The battery can only be inserted into the handle one way If the battery will not fit into the handle rotate it by 180º 4 3 ATTACHING THE DELIVERY NOZZLE 4 3 1 Thread the rigid or flexible delivery nozzle into ...

Page 3: ... pack grease into the cavity where the grease tube screws into the gun and operate the trigger fig 3 1 This will induce the intake of grease into the gun assembly 5 OPERATION 5 1 To operate the grease gun push the grease coupler fig 3 3 onto the grease nipple and squeeze the trigger fig 3 1 until the desired amount of grease has been delivered 5 2 AIR PURGING 5 2 1 If you encounter air pockets dur...

Page 4: ...y are registered with Valpak s registered compliance scheme Jack Sealey Ltd s Batteries Producer Registration Number BPRN is BPRN00705 Note It is our policy to continually improve products and as such we reserve the right to alter data specifications and component parts without prior notice Important No Liability is accepted for incorrect use of this product Warranty Guarantee is 12 months from pu...

Reviews: