![background image](http://html1.mh-extra.com/html/sealey/cp20vrs/cp20vrs_quick-start-manual_1226620001.webp)
RecipRocating saw 20v - body only
Model no:
cp20vRs
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. saFety
1.1. geneRal saFety.
9
disconnect the saw from the battery unit before changing accessories, servicing or performing any maintenance.
9
Maintain the saw and battery in good condition. Check moving parts alignment on a regular basis.
9
Replace or repair damaged parts. Use an authorised service agent and recommended parts only. Unauthorised parts may be
dangerous and will invalidate the warranty.
9
Ensure the saw is switched off before installing the battery pack.
9
Keep the saw and charger clean for best and safest performance.
9
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.
9
Evaluate your working area before using the multi-tool e.g. ceilings, floors and enclosures may contain electrical items or water piping.
9
ensure battery pack is correctly inserted into the tool handle and latched in place before attempting to switch it on.
9
Secure loose work pieces with a clamp, vice or other adequate holding device.
9
Avoid unintentional starting.
9
Wear approved safety eye protection (standard spectacles are not adequate).
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-skid shoes.
9
Keep children and unauthorised persons away from the working area.
9
Keep tool and charger in the case and store in a safe, dry, childproof area where the temperature will not exceed 104°F (40°C).
8
do not
use the tool where there are flammable liquids, solids or gases, such as paint solvents, etc.
8
do not
allow children to operate the tool.
8
do not
operate the tool if any parts are missing as this may cause failure and/or personal injury.
8
do not
hold unsecured work piece in your hand.
8
do not
leave the tool operating unattended.
8
do not
carry the tool with your finger on the power switch.
8
do not
use the tool for a task it is not designed to perform.
8
do not
operate the tool when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
do not
get the tool or battery charger wet or use in damp or wet locations.
2.
i
intRoduction
The 20V Series has been designed to suit users from the dIY enthusiast to the professional. These body only tools offer a one battery fits all
solution with a choice of 20V lithium batteries ranging from 2Ah to 4Ah, meaning costs can be kept down whilst quality remains high. Quality, stylish,
lightweight tools with durable composite housing and a soft grip making them comfortable and easy to use. Supplied with wood (6 tpi) and metal
(18 tpi) cutting blades.
3.
i
speciFication
Model no: .............................................................CP20VRS
no load Speed: ............................................... 0 - 3000 SPM
Stroke length ................................................................ 22mm
C
utting Specifications:
Wood ......................................................................... 115mm
Metal ............................................................................ 10mm
noise Power..............................................................93.31dB
noise Pressure .........................................................82.31dB
Vibration ............................................................... 19.682m/s
2
Uncertainty ................................................................. 1.5m/s
2
Weight: ........................................................................ 1.73kg
Consumables:
Battery: .............................20V 2Ah-4Ah li-ion (not included)
2Ah Battery .......................................................... CP20VBP2
3Ah Battery ............................................................ CP20VBP
4Ah Battery .......................................................... CP20VBP4
Mains charger ....................................................... CP20VMC
Refer to
instruction
manual
Wear eye
protection
Wear a
mask
Wear ear
protection
Wear protective
gloves
CP20VRS Issue 2 (2) 21/02/19
Original Language Version
© Jack Sealey limited