background image

ORBITAL PALM SANDER 20V 125MM - 
BODY ONLY

model no: 

CP20VOS

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, 

and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY

1.1.         GENERAL SAFETY

 

‰

  

WARNING! 

ensure that Health & Safety, local authority and general workshop practice regulations are adhered to when using this    

 sander.

 

9

      Familiarise yourself with the application, limitations and potential hazards of the sander.

 

‰

  

WARNING!

 disconnect from the battery and ensure that the pad is at a complete standstill before changing accessories,

              servicing or performing any maintenance.

 

9

      maintain the sander in good condition (use an authorised service agent).

 

9

      Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.

 

‰

  

WARNING! 

Keep all holding screws in place, tight and in good working order. Check regularly for damaged parts. 

           A part that is damaged must be repaired/replaced before the sander is next used. 

 

9

      Use the sander in a suitable work area and keep the area clean and tidy and free from unrelated materials. ensure that there is  

 

  adequate lighting.

 

9

       Keep the sander clean for best and safest performance.

 

9

      Before each use check all attachments for condition. If worn or damaged replace immediately.  

 

9

      ensure that there are no flammable materials near the work area.

 

‰

   

  WARNING! 

Wear approved safety eye protection, ear defenders and, if dust is generated, respiratory protection.

 

9

      maintain correct balance and footing. ensure that the floor is not slippery and wear non-slip shoes.

 

9

   Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain and/or tie back long hair.

 

9

   Keep children and unauthorised persons away from the work area.

 

9

   Avoid unintentional starting.

 

8

    

DO NOT

 use the sander for any purpose other than that for which it is designed. 

 

8

     

DO NOT

 operate the sander if any parts are damaged or missing as this may cause failure and/or personal injury.

 

8

     

DO NOT 

get the sander wet or use in damp or wet locations or areas where there is condensation.

 

8

     

DO NOT

 allow untrained persons to operate the polisher.

 

8

    

 DO NOT

 operate the sander when you are tired or under the influence of alcohol, drugs or intoxicating medication.

 

8

     

DO NOT

 use the sander where there are flammable liquids, solids or gases such as paint solvents, etc.

 

8

    

 DO NOT

 leave the sander operating unattended.

 

8

  

   DO NOT 

carry the sander with your finger on the power switch. 

 

9

   Use a qualified person to maintain the sander. 

 

9

   When not in use, remove and store in a safe, dry, childproof area.

1.2.    

LEAD PAINT WARNING! 

 

  Paint once contained lead as a traditional ingredient. Contact with the dust from the removal of such paint is toxic and must therefore  

 

  be avoided. The following action must be taken before using the sander on a surface that you suspect may contain lead paint.

1.2.1.   

User must determine potential hazard relating to age of paint to be removed. 

 

 

  (modern paints do not have lead content). 

 

  

DANGER! 

Keep all persons and pets away from the working area. The following persons are particularly vulnerable to the effects of lead  

  paint dust: 

Expectant women, babies and children. 

1.2.2.    We recommend personal protection by using the following safety items:

  

a

)  Paint Spray Respirator (our ref SSP1699)   

  

b

)  Pe Coated Hooded Coverall (our ref SSP266).

  

c

)  latex Gloves (our ref SSP24).

1.2.3.   

Take adequate measures to contain the paint dust, flakes and scrapings.

1.2.4.    Continue to wear safety equipment as in (3) above and thoroughly clean all areas when task is complete. ensure paint waste is disposed.  

 

of in sealed bags or containers according to local regulations.

 

9

 

9

 

9

Refer to 

instruction 

manual

Wear eye

protection

CP20VoS | Issue 1  10/04/18

Original Language Version

© Jack Sealey limited

Wear 

protective

gloves

Wear a

mask

Wear ear

protection

Summary of Contents for CP20VOS

Page 1: ...rings and other loose jewellery and contain and or tie back long hair 9 9 Keep children and unauthorised persons away from the work area 9 9 Avoid unintentional starting 8 8 DO NOT use the sander for any purpose other than that for which it is designed 8 8 DO NOT operate the sander if any parts are damaged or missing as this may cause failure and or personal injury 8 8 DO NOT get the sander wet or...

Page 2: ... a sanding disc 4 2 3 Match the holes in a suitable disc with the holes in the base and simply press the disc to the base to attach it 4 2 4 To remove the disc peel it away from the base 4 2 5 Note To maximise the life of the Hook Loop Sanding Base peel the sanding disc off slowly rather than rapidly removing it to avoid damage to the hook and loop system WARNING Take care to regularly clean out t...

Page 3: ... the battery before detaching the dust extraction system WARNING Always wear respiratory protection eye protection and gloves when emptying the Dust Bag 5 2 1 Note For optimum dust removal empty the Dust Bag when it is no more than half full 5 2 2 To empty the bag pull the bag assembly from the extraction pipe hold it upright and twist the cap anticlockwise to remove the cap 5 2 3 Dispose of the w...

Page 4: ...tions Measured vibration emission value a 7 521 m s Uncertainty value k 1 5 m s Please note that the application of the tool to a sole specialist task may produce a different average vibration emission We recommend that a specific evaluation of the vibration emission is conducted prior to commencing with a specialist task A health and safety assessment by the user or employer will need to be carri...

Reviews: