10.8V CORDLESS MULTIPURPOSE MINI
GRINDER & 50PC ACCESSORY KIT - BODY
ONLY
MODEL NO:
CP108VMGBO
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING!
Remove the battery pack from the cordless multipurpose mini grinder before changing accessories, servicing or
performing any maintenance.
9
Maintain the cordless multipurpose mini grinder in good condition. Check moving parts alignment on a regular basis.
9
Replace or repair damaged parts. Use an authorised service agent and recommended parts only. Unauthorised parts may be
dangerous and will invalidate the warranty.
9
Ensure the cordless multipurpose mini grinder is switched off before installing the battery pack.
9
Keep the cordless multipurpose mini grinder clean for best and safest performance.
9
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.
9
Evaluate your working area before using the cordless multipurpose mini grinder e.g. ceilings, floors and enclosures may contain
electrical items or water piping.
9
Ensure battery pack (sold separately) is correctly inserted into the cordless multipurpose mini grinder and latched in place before
attempting to switch on.
9
Secure loose work pieces with a clamp, vice or other adequate holding device (not supplied).
9
Avoid unintentional starting.
9
Wear approved safety eye protection (standard spectacles are not adequate).
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-skid shoes.
9
Keep children and unauthorised persons away from the working area.
9
Store the cordless multipurpose mini grinder and accessories in the original box, in a safe, dry, childproof area where the
temperature will not exceed 104°F (40°C).
8
DO NOT
use the cordless multipurpose mini grinder where there are flammable liquids, solids or gases, such as paint solvents, etc.
8
DO NOT
allow children to operate the cordless multipurpose mini grinder.
8
DO NOT
operate the cordless multipurpose mini grinder if any parts are missing as this may cause failure and/or personal injury.
8
DO NOT
hold unsecured work piece in your hand.
8
DO NOT
leave the cordless multipurpose mini grinder operating unattended.
8
DO NOT
carry the cordless multipurpose mini grinder with your finger on the power switch.
8
DO NOT
use the cordless multipurpose mini grinder for a task it is not designed to perform.
8
DO NOT
operate the cordless multipurpose mini grinder when you are tired or under the influence of alcohol, drugs or intoxicating
medication.
8
DO NOT
get the cordless multipurpose mini grinder or battery wet or use in damp or wet locations.
8
DO NOT
force the cordless multipurpose mini grinder. Use the correct tool for the job it was designed for.
8
DO NOT
use any accessories other than those supplied with the cordless multipurpose mini grinder.
8
DO NOT
use any accessory tools which require any liquid coolant.
2. INTRODUCTION
C
ompact, lightweight cordless multipurpose mini grinder and 50-piece accessory kit - body only. Comfortable composite housing with soft grip
to reduce vibration. 7-Speed settings provide the control required to complete various tasks. Quick release collet and spindle lock for fast tool
changes. Supplied with a 50-piece range of tips, wheels, discs, dressing stones and a chuck spanner. Integral LED working light and LED
battery level indicator. Requires compatible 10.8V 2Ah or 4Ah battery and mains charger, sold separately.
3. SPECIFICATION
Model no: ....................................................... CP108VMGBO
Battery: ......................................................10.8V 2aH or 4Ah
Consumable parts (battery) ....................................................
2Ah ...................................................................... CP108VBP
4Ah .................................................................... CP108VBP4
Collets: .........1.0 (x1), 1.7 (x1), 2.0 (x1), 2.4 (x1), 3.2 (x1)mm
Free speed: .................................................
5000 - 25000rpm
C
P108VMGBO Issue 1 07/04/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Wear a mask
