instructions for
modular storage system
model no:
aPms serIes
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
WarNINg!
ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this
storage system.
locate in a suitable work area.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
WarNINg!
use storage on level and solid ground, preferably concrete.
Keep the storage system clean and tidy in accordance with good workshop practice.
Keep children and unauthorised persons away from the work area.
do Not
use the storage system for any purpose other than that for which it is designed.
do Not
use the storage system outdoors.
do Not
place the storage system in a damp or wet location or an area where there is condensation.
do Not
clean the storage system with any solvents which may damage the surfaces or the protective coating.
do Not
move the storage system when there are items placed inside.
do Not
step on the shelves.
do Not
overload the storage system.
2. INtroductIoN
m
odular storage system ideal for any garage/workshop. Durable construction that will last for years. Easily adjusts to specific needs. Purchase a
simple base cabinet or create a full workshop storage system.
3. sPecIfIcatIoN
model no: ............ aPms50ucs upright connector single
size W x d x H: ......................................32.5 x 30 x 1420mm
model no: ...........aPms50ucd upright connector double
size W x d x H: .........................................65 x 30 x 1420mm
model no: ....................................... aPms50BP Back Panel
size W x d x H: .......................................615 x 24 x 1052mm
Hole dimensions:................................................ 9.1 x 9.1mm
Hole distance: .............................................................. 29mm
model no: ...............aPms52 2 door floor cabinet 680mm
size W x d x H: .......................................680 x 458 x 910mm
model no: .............................aPms53 Wall cabinet 680mm
size W x d x H: .......................................680 x 281 x 350mm
model no: ...aPms54 Wall cabinet tambour front 680mm
size W x d x H: .......................................680 x 281 x 350mm
model no: ............ aPms57 cabinet multi-function 680mm
size W x d x H: .......................................680 x 458 x 910mm
A
PMS SERIES | Issue 1 14/04/16
Original Language Version
© Jack sealey limited
refer to
instruction
manual
Wear
P
rotective
gloves
