instructions for
industrial cabinet 3 shelf 900mm
model no:
apiccomboh2
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
WarninG!
ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this cabinet.
9
locate cabinet in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
WarninG!
use cabinet on level and solid ground, preferably concrete.
9
Keep the cabinet clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
8
do not
use the cabinet for any purpose other than that for which it is designed.
8
do not
use the cabinet outdoors.
8
do not
place the cabinet in a damp or wet location or an area where there is condensation.
8
do not
clean the cabinet with any solvents which may damage the surfaces or the protective coating.
8
do not
move the cabinet when there are items placed inside.
8
do not
overload the cabinet.
2. introduction
industrial quality, double door, freestanding cabinets with three shelves. easily assembled with minimal tool use. durable scuff resistant,
adjustable shelving each with a weight limit of 150kg. Drawers run on heavy duty ball bearing slides each with a weight limit of 75kg, fitted
with safety locking catches preventing inadvertant opening.reinforced steel doors with zinc plated locking bars, provide 3 point locking.
Supplied with two coded keys. Ideal for home, office, garage or workshop use.
3. specification
model no: ...................................apiccomboh2
Width x depth x Height
overall size: ...........................900 x 450 x 900mm
shelf size (x4): .........................840 x 380 x 30mm
internal cabinet overall size: ...850 x 420 x 810mm
4. cabinet contents
unpack the contents of the boxes and check against the parts
lists/diagrams. if there are any parts missing, contact your local
sealey dealer.
part no. part name
no. of
A1
rear Panel
1
A2
rear Panel
1
B1
left side Panel
1
B2
right side Panel 1
c1
left door
1
c2
right door
1
d top
1
e
Bottom
1
f
inner face Plate 1
G
outer face Plate 1
J
Plastic stop
4
K
locking Pin locator 2
l
Hinge Pin locator 4
m
screw
18
n
Hinge Pin
4
refer to
instruction
manual
Original Language Version
© Jack sealey limited
APiccomBoH2 issue 2(sP) - 15/03/17
