INSTRUCTIONS FOR:
HEAVY DUTY MOBILE TOOL & PARTS TROLLEY
2 DRAWERS
&
LOCKABLE TOP
MODEL NO:
AP760M SERIES
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions and maintained properly, give you years of trouble free performance.
Refer to
Instruction
Manual
1. SAFETY
AP760MSERIES Issue: 1 - 04/01/18
Original Language Version
© Jack Sealey Limited
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations
are adhered to when using this trolley.
Always load evenly with the centre of gravity of the load as near centre of the trolley as possible.
DO NOT
overload the trolley - see section 3.
Use the trolley in a suitable work area.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Keep the trolley clean and tidy in accordance with good workshop practice.
DO NOT
use the trolley
for any purpose other than that for which it is designed.
DO NOT
stand on the trolley, use it as a ladder or allow others to ride on the trolley.
Use the wheel locks to prevent the trolley from inadvertently moving.
DO NOT
leave unattended, especially when loaded, unless the wheels are locked, chocked or the trolley otherwise secured.
DO NOT
use trolley on uneven ground and do not run over curbs or steps - use a ramp.
DO NOT
use trolley if any part is significantly damaged, paying particular attention to the wheels.
Keep children and unauthorised persons away from the work area.
2. INTRODUCTION
Garage or workshop trolley with two shelves and a lockable gas sprung supported lid, which allows for items to be kept safe when not in use.
Features two 40kg capacity drawers with ball bearing slides. The unit features an additional screwdriver holder ideal for quick access whilst
working. Two lower storage shelves with a 50kg capacity each, can be installed base down or base up to give either tool and component security
or unobstructed access. Fitted with four heavy-duty 4" PU castors, two of which are locking.
3. SPECIFICATION
Model No:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AP760M SERIES
Dimensions (W x D x H):
Overall Size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 925 x 440 x 900mm
Shelf Size (x2):. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 760 x 435 x 60mm
Medium Drawer (x1): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 560 x 400 x 65mm
Medium Drawer (x1): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 560 x 400 x 85mm
Upper Tray Size:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 585 x 435 x 75mm
Total Load Capacity:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150kg
4. ASSEMBLY
fig.1
