13 DRAWER TOPCHEST & ROLLCAB
COMBINATION WITH BALL-BEARING SLIDES -
RED/GREY
MODEL NO:
AP22513BB.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this Topchest
& Rollcab combination.
9
Locate the Topchest & Rollcab combination in a suitable working area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the Topchest & Rollcab combination clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
8
DO NOT
use the Topchest & Rollcab combination
for any purpose other than that for which it is designed.
8
DO NOT
move the Topchest & Rollcab combination with drawers open.
8
DO NOT
open more than one drawer at the same time.
8
DO NOT
step on the drawers.
8
DO NOT
use in damp work areas.
WARNING!
The warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied
by the operator.
2. INTRODUCTION
The economical way to buy American PRO® Ball-Bearing quality tool chests. Supplied packed one inside the other. This combo has smooth
25mm ball-bearing slides and all the features of the professional chests except that the swivel castors are Ø100mm. Features locks on both
the topchest and rollcab, with removable steel bar on the rollcab and integral bars on the topchest. Supplied with two keys for each lock.
3. SPECIFICATION
Model No: ........................................................... AP22513.V3
W x D x H:
9 Drawer Topchest :
Overall Size: ............................................600 x 260 x 380mm
Small Split Drawer (x6): ............................150 x 220 x 35mm
Small Drawer (x2): ....................................510 x 220 x 35mm
Medium Drawer (x1): .................................510 x 220 x 80mm
4. ASSEMBLY
4.1.
Remove nuts, bolts and washers from base then lift off body, fig.1.
4.2.
Remove base, fig.2 and reattach fig.3.
AP22513BB.V3 Issue:1 11/01/22
Original Language Version
© Jack Sealey Limited
4 Drawer Rollcab:
Overall Size: ............................................615 x 330 x 935mm
Small Drawer (x2): ....................................515 x 305 x 45mm
Medium Drawer (x2): .................................515 x 305 x 80mm
Cupboard (x1): ........................................610 x 295 x 425mm
