INSTRUCTIONS FOR:
MODEL:
AK9624EV
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS, AND
CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE, FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO
MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to
when using tools and equipment.
DO NOT
use if damaged.
Maintain calliper in good and clean condition for best performance.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Keep children and unauthorised persons away from the work area.
DO NOT
use the calliper for any purpose other than for which it is designed.
DO NOT
get calliper wet or use in damp or wet locations, or areas where there is condensation. Keep calliper clean
and dry using a dry cotton cloth only.
DO NOT
dip or submerge the calliper in any type of liquid.
DO NOT
expose calliper to bright sunlight or dust.
DO NOT
disassemble. The calliper must be checked by qualified service personnel only.
DO NOT
apply any voltage to the calliper i.e. with an electric marker pen.
The calliper is a precision instrument, treat with care, avoid using force and do not subject to knocks or shocks.
Use in reasonably constant temperature conditions of approximately 20
°
C.
When not in use,
turn off
and store gauge in a safe, dry, childproof location.
Hardened and tempered stainless steel digital calliper with satin finish. Large LCD display with 11mm high figures for ease of
reading. Metric and Imperial calibration with conversion between the two. Zero setting control allows comparative measurement.
Supplied in robust storage case.
DIGITAL VERNIER CALLIPER 0-200mm/0-8”
1
Internal Measure
5
LCD Display
9
Battery Cover
2
On / mm / inch Button
6
External Measure
10 Depth Measure
3
Locking Screw
7
Off Button
11
Step Measure
4
Fine Adjust Wheel
8
Zero Button
Resolution
0.01mm (0.0005”)
Range
0-200mm (0-8”)
Accuracy
±0.03mm/0.001”
Functions
Zero set, mm/inch select, incremental zero
Messages
Flashing display = replace battery
Battery life
Approx. two years (approx. one year in continuous service)
Battery
LR44 - 1.5V
Operational Temperature range
0 - 40
°
C
1
2
3
4
5
6
7 8
9
10
11
AK9624EV Issue No: 1 18/09/08
1.
SAFETY INSTRUCTIONS
2.
INTRODUCTION & SPECIFICATION
