35ltr Air DischArge Mobile oil
DrAiner with Probes
Model no:
AK456DX
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. sAfety
wArning!
ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
equipment.
9
Familiarise yourself with the application and limitations of the oil drainer, as well as the potential hazards.
wArning!
disconnect the drainer from the air supply before changing accessories, servicing or performing any maintenance.
9
Maintain the drainer in good condition (use an authorised service agent).
9
Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the drainer clean for best and safest performance.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
wArning!
While extracting high temperature oils, keep hands, face and body protected using suitable personal protective
equipment.
9
Keep children and unauthorised persons away from the work area.
wArning!
ensure correct air pressure is maintained and not exceeded.
9
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use, and ensure that all connections are
secure.
8
Do not
extract caustic or flammable products.
8
Do not
use the drainer for any purpose other than that for which it is designed.
8
Do not
operate the drainer if any parts are damaged or missing as this may cause failure and/or personal injury.
8
Do not
stand on the drainer.
8
Do not
adjust or tamper with the safety valve.
8
Do not
move the drainer by the hose, or yank the hose from the air supply.
8
Do not
place attachments close to your face (especially eyes, ears, etc.) and do not point hose at other persons or animals.
8
Do not
allow untrained persons to operate the drainer.
8
Do not
operate the drainer when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
Do not
leave the drainer operating unattended.
8
Do not
direct air from the air hose at yourself or others.
9
When not in use, disconnect from the air supply, vent reservoir and store in a safe, dry, childproof area.
9
dispose of waste oil in accordance with local authority regulations.
wArning!
Do not
pollute the environment by allowing uncontrolled discharge of waste oil.
▲
DAnger
!
Do not
release drain pan clamp lever when there is pressure in the reservoir as pipe and drain pan will be propelled
upward with force. This could result in damage and/or serious injury.
2. introDuction
S
teel fabricated 35ltr reservoir. Height adjustable steel drain pan, fitted with grid filter. Features gravity feed reservoir with air discharge hose.
Includes quick release oil dipstick probes, powered by venturi suction pump. Fitted with heavy-duty wheels and castors for easy mobility.
3. sPecificAtion
Model no:.............................................................. AK456DX
Air discharge: .................................................................. Yes
Air Inlet Size: ....................................................................1/4”
Capacity: .........................................................................35ltr
Collection Bowl Capacity (ltr): ......................................... 18ltr
Gravity discharge: ............................................................ no
Gravity Feed: ................................................................... Yes
Maximum Height to Pan: .......................................... 1420mm
Maximum Inlet Pressure: ................................................7bar
Minimum Height to Pan: ............................................. 935mm
Model no: .............................................................. AK456dX
oil discharge Pressure (bar): .......................................0.5bar
Pump discharge: .............................................................. no
Suction Probe: ................................................................. Yes
Temperature Range: ....................................................<80°C
AK456dX Issue 1 (3) 11/06/19
Original Language Version
© Jack Sealey limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Wear safety
footwear
Wear protective
clothing
