Instructions For:
ELECTRONIC MICRO SOLDERING TORCH
Model No:
AK293
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY,
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
p
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations
are adhered to when using this equipment.
p
WARNING!
Always wear approved eye or face protection when operating the torch.
p
WARNING!
Butane gas is extremely flammable, handle with care.
p
WARNING!
Always point the torch away from the eyes and body when igniting and during operation.
p
WARNING!
Ensure the Adjustment Knob is firmly closed and the flame completely extinguished
after use.
p
WARNING!
Do not puncture the cannister or dispose of in a fire.
7
DO NOT use the torch in an area where paint fumes, solvents or flammable liquids pose a
potential hazard. Keep flammable material away from the torch when operating. Flammable waste,
such as wiping or cleaning rags, must be placed in a closed metal container and disposed of correctly.
8
DONOT operate the torch when you are tired or under the influence of alcohol, drugs or intoxicating
medication.
8
DO NOT hold the workpiece by hand. Use clamps or a vice (not included) to secure the workpiece.
8
DO NOT operate the torch if any parts are damaged or missing as this may cause failure and/ or
possible personal injury.
8
DO NOT touch the workpiece close to the heated area as it will be very hot. Allow to cool.
8
DO NOT touch the flame guard during or immediately after use as it will be very hot. Allow to cool.
8
DO NOT leave the torch operating whilst unattended.
8
DO NOT use this torch for longer than one hour continuously.
8
DO NOT allow children to operate the torch.
3
When not in use store away from direct sunlight in a safe, dry, childproof area, where the temperature
will not exceed 40°C (104°F).
3
Familiarise yourself with application and limitations, as well as the specific potential hazards peculiar
to the torch.
3
When not in use ensure the gas supply is turned off.
3
Keep children and unauthorised persons away from the working area.
3
Remove ill fitting clothing. Remove ties, watches, rings, and other loose jewellery, and contain
and/or tie back long hair.
3
After use, allow the torch to cool before storing it.
1.
SAFETY INSTRUCTIONS
AK293 - 2 - 110504
AK293 - 2 - 110504
Instructions For:
ELECTRONIC MICRO SOLDERING TORCH
Model No:
AK293
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY,
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
p
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations
are adhered to when using this equipment.
p
WARNING!
Always wear approved eye or face protection when operating the torch.
p
WARNING!
Butane gas is extremely flammable, handle with care.
p
WARNING!
Always point the torch away from the eyes and body when igniting and during operation.
p
WARNING!
Ensure the Adjustment Knob is firmly closed and the flame completely extinguished
after use.
p
WARNING!
Do not puncture the cannister or dispose of in a fire.
7
DO NOT use the torch in an area where paint fumes, solvents or flammable liquids pose a
potential hazard. Keep flammable material away from the torch when operating. Flammable waste,
such as wiping or cleaning rags, must be placed in a closed metal container and disposed of correctly.
8
DONOT operate the torch when you are tired or under the influence of alcohol, drugs or intoxicating
medication.
8
DO NOT hold the workpiece by hand. Use clamps or a vice (not included) to secure the workpiece.
8
DO NOT operate the torch if any parts are damaged or missing as this may cause failure and/ or
possible personal injury.
8
DO NOT touch the workpiece close to the heated area as it will be very hot. Allow to cool.
8
DO NOT touch the flame guard during or immediately after use as it will be very hot. Allow to cool.
8
DO NOT leave the torch operating whilst unattended.
8
DO NOT use this torch for longer than one hour continuously.
8
DO NOT allow children to operate the torch.
3
When not in use store away from direct sunlight in a safe, dry, childproof area, where the temperature
will not exceed 40°C (104°F).
3
Familiarise yourself with application and limitations, as well as the specific potential hazards peculiar
to the torch.
3
When not in use ensure the gas supply is turned off.
3
Keep children and unauthorised persons away from the working area.
3
Remove ill fitting clothing. Remove ties, watches, rings, and other loose jewellery, and contain
and/or tie back long hair.
3
After use, allow the torch to cool before storing it.
Piezoelectric ignition with ceramic burner
head for simple operation and long life.
1300°C burner flame adjustable from 12mm
to 35mm. Includes bench stand for hands
free operation. Standard fill gives approximately
1 hour continuous operation. Overall Height
155mm.
1.
SAFETY INSTRUCTIONS
2.
INTRODUCTION & SPECIFICATIONS
Adjustment Knob
Ignition Button
Air Control Sleeve
Flame Guard
Ignition Pin
Gas Tank
Stand Base
ON
Filling Valve
Piezoelectric ignition with ceramic burner
head for simple operation and long life.
1300°C burner flame adjustable from 12mm
to 35mm. Includes bench stand for hands
free operation. Standard fill gives approximately
1 hour continuous operation. Overall Height
155mm.
2.
INTRODUCTION & SPECIFICATIONS
Adjustment Knob
Ignition Button
Air Control Sleeve
Flame Guard
Ignition Pin
Gas Tank
Stand Base
ON
Filling Valve
Fig.A
Fig.A
