3. OpeRATiOn
note:
Depending on the location of the AdBlue® filler port the funnel can either be filled whilst attached to the vehicle or at a more convenient
location and then attached.
3.1.
Screw the funnel onto the AdBlue® filler cap.
3.2.
Fill the funnel to the desired level using the graduated scale.
3.3.
Release the internal plunger valve.
3.4.
When the reservoir is full close off internal valve to stop flow.
3.5.
Unscrew funnel from filler cap and dispense of unused AdBlue® into suitable container.
3.6.
Clean funnel with water
Breather
Pipe
Car
Adaptor
Lid
Plunger
Valve
Sealey group, Kempson Way, Suffolk Business park, Bury St edmunds, Suffolk. ip32 7AR
01284 757500
01284 703534
www.sealey.co.uk
note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
enviROnMenT pROTecTiOn
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
ADB07A, ADB07S Issue 1 07/06/18
Original Language Version
© Jack Sealey limited
fig.1
fig.2
