trolley jacks 2tonne
model no:
1050cX.V4, 1050cXD.V3
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. saFety
9
ensure the jack is in sound condition and good working order. Take action for immediate repair or replacement
of damaged parts. Use genuine parts only. The use of unapproved parts may be dangerous and will invalidate the
warranty.
9
locate the jack in a suitable, well lit working area.
9
Keep working area clean and tidy and free from unrelated materials.
9
Use jack on level and solid ground, preferably concrete. Avoid tarmacadam as jack may sink in.
9
Place wedges under wheels of vehicle (but ensure wheels of jack can freely move).
9
ensure the vehicle handbrake is engaged, engine is switched off and transmission is in gear (or “PARK” if
automatic).
9
ensure minimum distance of 0.5m between vehicle and static objects such as doors, walls, etc., to allow for vehicle
tilting.
9
ensure there are no passengers in the vehicle.
9
ensure all non-essential persons keep a safe distance whilst the jack is in use.
9
only place jack under those lifting points recommended by vehicle manufacturer (see vehicle hand book).
9
Check the lifting point is stable and centred on the jack saddle.
9
ensure the jack wheels are free to move and that there are no obstructions.
▲
DanGer:
Use the jack for lifting only,
not
for supporting the lifted load.
9
Use suitable capacity axle stands under the vehicle before proceeding with any task.
9
ensure there are no persons or obstructions beneath the vehicle before lowering.
9
Use a qualified person to maintain or repair the jack hydraulic system.
8
Do not
operate the jack if damaged.
8
Do not
allow untrained persons to operate the jack.
8
Do not
exceed the rated capacity of the jack (2tonne/2000kg). When lifting a load of maximum capacity or close
to it, it is recommended that the effort be reduced by the use of assistance during this operation.
8
Do not
allow the vehicle to move while supported by the jack, or use the jack to move the vehicle.
8
Do not
jack vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.
8
Do not
work under the vehicle until axle stands have been correctly positioned.
8
Do not
use the jack for purposes other than which it is intended.
8
Do not
top up hydraulic system with brake fluid. Use hydraulic jack oil only.
8
Do not
adjust the safety overload valve.
9
When not in use store jack, fully lowered, in a safe, dry, childproof area.
2. introDuction
S
teel chassis with welded castor supports and one piece hydraulic unit. Fitted with overload valve and finger cover for extra safety. Suitable for
The hobby user or as an emergency mobile jack. Includes one piece pumping handle and carry handle. 1050CXd.V3 supplied in tough
Carry/storage case to keep dirty jack away from contents of car boot.
3. speciFication
model no’s ..................................... 1050CX.V4, 1050CXd.V3
Capacity: ........................................................ 2tonne/2000kg
minimum saddle height: ............................................. 117mm
maximum saddle height: ............................................ 322mm
maximum chassis height: ........................................... 160mm
Chassis length: .......................................................... 440mm
Weight: .......................................................................... 8.6kg
1050CX.V4, 1050CXd.V3 | Issue:2 (1,F) 22/01/19
Original Language Version
© Jack Sealey limited
Refer to
instruction
manual
Wear safety
footwear
Apply
Chock
Wheels
Never
exceed
X2
