47
© Sealevel Systems, Inc. SeaConnect 370 Manual | SL9269 11/2022
The “Device Configuration” selection drop-box is not supported for the SeaConnect 370 and is therefore
disabled.
“Show Hexadecimal Values” checkbox – Displays the values returned by the A/D converter as a
hexadecimal value without converting the values to engineering units (i.e., Milliamps or Volts)
Converting A/D Values
To properly use the values returned from the SeaConnect 370 module’s A/D channels, the application
program must convert the returned values to engineering units.
The conversion formulas will vary depending on how the I/O module is configured. The formulas and their
uses are covered in detail in the interactive documentation located on the Sealevel website at
http://www.sealevel.com/software/SeaMAX/
. For ease of use, SeaMAX functions to convert A/D values
have been provided. Use of these functions is also detailed in the SeaMAX Software Manual
.
Troubleshooting SeaMAX
Following these simple steps can eliminate most common problems.
1.
Read this manual thoroughly before attempting to install the device in your system.
2.
Uninstall any previous versions of the SeaMAX software before installing any new
versions.
3.
Use the MaxSSD utility, to verify proper installation. MaxSSD is designed to simplify the
installation, configuration, and diagnostics of Sealevel SeaConnect modules.
4.
If these steps do not solve your problem, please contact Sealevel Technical Support. Our
technical support is free and available from 8:00 AM-5:00 PM Eastern Time, Monday
through Friday. You can contact Technical Support via email at
by phone at +1 (864) 843-4343.
