18
© Sealevel Systems, Inc.
HUB7M Manual | SL9184 10/2021
Appendix E
–
Compliance Notices
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in such cas
e the user will be required to correct the interference at the user’s expense.
EMC Directive Statement
Products bearing the CE Label fulfill the requirements of the EMC directive (89/336/EEC) and of
the low-voltage directive (73/23/EEC) issued by the European Commission. To obey these
directives, the following European standards must be met:
•
EN55022 Class A
-
“Limits and methods of measurement of radio interference
characteristics of information technology equipment”
•
EN55024
–
“Information
technology equipment Immunity characteristics Limits and
methods of measurement”.
This is a Class A Product. In a domestic environment, this product may cause radio interference in which
case the user may be required to take adequate measures to prevent or correct the interference.
Always use cabling provided with this product if possible. If no cable is provided or if an alternate cable
is required, use high quality shielded cabling to maintain compliance with FCC/EMC directives.
