12
© Sealevel Systems, Inc.
HUB7M Manual | SL9184 10/2021
Mounting Options
SeaI/O Mounting Kit
The HUB7M is ideal for adding USB ports to a Relio R1000 embedded solid-
state industrial computer (as shown), SeaPAC touchscreen HMI system, or a
SeaI/O data acquisition “stack”. Order the expansion kit (
) that
includes four metal straps and four #4-40 metal screws.
DIN Rail Mounting
The HUB7M is available with a factory-installed DIN-rail mounting clip.
Alternatively, DIN-rail mounting clips can be ordered as a field upgrade kit
(
. The bracket with clip is easily attached using two included #4-
40 Phillips-head machine screws.
Table/Wall Mounting
The flush mount bracket kit (
is extremely versatile and can be
used to mount the HUB7M from the top, bottom, or back edge. The hub alone
or with a stack of SeaI/O modules can be mounted flat to a tabletop,
underneath a counter, or inside an enclosure. The kit can be used to mount the
hub flat to a wall, or along the back edge, similar to DIN-rail mounting options.
Universal Mounting Bracket
The universal mounting bracket (
) can be used as a “backpack” to
other USB peripheral devices to the HUB7M. The universal arrangement of
slots and holes accept bolt sizes to M4 and can be used for virtually any
mounting configuration. The bracket also has holes for both 75mm and
100mm VESA mounting options.
