SEAL 54Base, User Manual

Page: 14 / 36

3.3 Material specifications
Maximum width: Metric American
Process up to 40°C (104 °F)
– 62 Base
1600 mm 63 in.
- 54 Base 1400 mm 55.1 in.
Maximum roll diameter: (same both models)
Material unwind (upper unwind) 240 mm 9.4 in.
Material unwind (bottom unwind) 305 mm 1 ft.
Release liner wind-up 160 mm 6.3 in.
Maximum panel thickness: 50 mm 2.0 in.
Roll core inside diameter: 76.2 mm 3.0 in.
3.4 Machine specifications
Power ratings:
Europe 1N/PE /- 10%, 50/60Hz, 9.0A
USA - 62 Base 1N/PE /- 10%, 50/60Hz, 16.0A
- 54 Base 1N/PE /- 10%, 50/60Hz, 15.0A
(NEMA 5-20 plug supplied)
For the correct supply voltage version refer to the identification label on the machine.
Standard number of shaft positions:
Material unwind 2 (auto-grip)
Release liner wind-up 1
Nip setting: 0
–52
mm 0
– 2.05 in.
Pressure: 0.3
–1.0 N/mm
1.71
– 5.71 lbf/in.
Process speed:
Maximum 5 m/min 16.4 ft/min
Slow mode 0.9 m/min 3.0 ft/min
Maximum roller temperature: 40 °C 104 °F
Noise level <70 dB(A)
3.5 Optional features
The 54/62 Base “A” version has several options available. They are:
Item Description Part number
1 54 Base Infeed Trough Option 64619A
2 62 Base Infeed Trough Option 64614A
3 Leveling feet Option 5406A
4 54 Base Image Guide 64624A
5 62 Base Image Guide 64625A
6
Option 54 Base Lower Take-up W/ Plastic AutoGrip 64620
7 Option 62 Base Lower Take-up W/ Plastic AutoGrip 64618
8 POWER REAR TAKE UP OPTION 62 BASE 64623
Contact your sales representative or a customer service representative for more information.
Note: Some options may be included with your model.