Troubleshooting
To determine what state Seagull #MAP2 is currently in - simply read the output
of the "STATE LED" and match it with the "Action" in the table below.
The following table shows the STATE LED readout for the different states / modes.
STATE LED
Action
Blinking
No Signal - check connections and mode values
Fading
Ready - waiting for next command
Solid on
Active in one of the 5 modes – return to "Neutral" before next command
Fade >> Solid on
Keep-alive mode activated - return to "Neutral" to exit the mode
Fade >> Solid on
AF-T mode activated - return to "Neutral" before next command
Fade >> Solid on (repeat) Timelapse mode activated – return to "Neutral" to exit the mode
Blink >> Solid on
IS-T mode activated - return to "Neutral" before new command
Blink >> Solid on
Camera On/Off activated (Only Sony "Multi" cameras)
Technical specifications
•
Dimensions: 28.6 x 10.3 x 7.7 mm
•
Weight: 1.6g
( ~ 12g with cables - depending on cable type )
•
Voltage: 3.5 – 5.5 volts ( 5 volts recommended –
do
NOT
exceed 5.5 volts !!
)
•
Current: 21.75mA max ( when STATE LED is Solid ON - varies when Fading )
•
Input signal: Standard R/C PWM between 1000 – 2000
μ
S
