Seagate ST4000NM0004, Product Manual

Page: 8 / 43

Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. J 7
2.0 Drive specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the
phrases the drive and this drive are used throughout this manual to indicate the following drive models
2.1 Specification summary tables
The specifications listed in the following tables are for quick reference. For details on specification measurement or definition, see the
appropriate section of this manual.
Table 1 Drive specifications summary
4KN Models 5xxE Models
Standard
models
Self-Encrypting
(SED) models
FIPS 140-2 Level 2
(Review Pending)
Standard
models
Self-Encrypting
(SED) models
FIPS 140-2
Level 2 model
ST6000NM0004 ST6000NM0064 ST6000NM0094
ST6000NM0024,
ST6000NM0124
ST6000NM0044 ST6000NM0084
ST5000NM0084,
ST5000NM0124
ST4000NM0004 ST4000NM0064
ST4000NM0024,
ST4000NM0124
ST4000NM0044
ST2000NM0004 ST2000NM0064 ST2000NM0024 ST2000NM0044
Drive specification
ST6000NM0004, ST6000NM0024
ST6000NM0044, ST6000NM0064
ST6000NM0084, ST6000NM0094
ST6000NM0124
ST5000NM0084
ST5000NM0124
ST4000NM0004
ST4000NM0024
ST4000NM0044
ST4000NM0064
ST4000NM0124
ST2000NM0004
ST2000NM0024
ST2000NM0044
ST2000NM0064
Formatted (512 bytes/sector)* 6TB 5TB 4TB 2TB
Guaranteed sectors (see Section 2.2 )
Heads 12 8 4
Discs 6 4 2
Bytes per logical sector 512
Bytes per physical sector 4096
Recording density, KBPI (Kb/in max) 1981
Track density, KTPI (ktracks/in avg.) 320
Areal density, (Gb/in
2
avg) 633
Spindle speed (RPM) 7200
Internal data transfer rate (Mb/s max) 2317
Sustained data transfer rate OD
(MiB/s max)
216 (226 MB/s max)
I/O data-transfer rate (MB/s max) 600
ATA data-transfer modes supported
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
Cache buffer 128MB (129,536KB)
Weight: (maximum) 780g (1.72 lb) 680g (1.50 lb) 610g (1.34 lb)
Average latency 4.16ms
Power-on to ready (sec) (typ/max) 23/30
Standby to ready (sec) (typ/max) 23/30
Startup current (typical) 12V (peak)
2.6A
2.0A (optional configuration through Smart Command Transport)
Voltage tolerance (including noise)
5V +10/-5%
12V ±10%
Ambient temperature
5° to 60°C (operating/tested)
–40° to 70°C (nonoperating)
Temperature gradient
(°C per hour max)
20°C (operating)
30°C (nonoperating)