background image

Seagate Enterprise Performance 10K HDD v8 Product Manual, Rev. A

  9

  

Korean KCC

If these drives have the Korean Communications Commission (KCC) logo, they comply with KN22, KN 24, and KN61000.

Taiwanese BSMI

If this model has the Taiwanese certification mark then it complies with Chinese National Standard, CNS13438.

2.1.3

European Union Restriction of Hazardous Substances (RoHS)

The European Union Restriction of Hazardous Substances (RoHS) Directive restricts the presence of chemical substances, including

 

Lead (Pb), in electronic products effective July 2006.

A number of parts and materials in Seagate products are procured from external suppliers. We rely on the representations of our 
suppliers regarding the presence of RoHS substances in these parts and materials. Our supplier contracts require compliance with

 

our chemical substance restrictions, and our suppliers document their compliance with our requirements by providing material 
content declarations for all parts and materials for the disk drives documented in this publication. Current supplier declarations 
include disclosure of the inclusion of any RoHS-regulated substance in such parts or materials.

Seagate also has internal systems in place to ensure ongoing compliance with the RoHS Directive and all laws and regulations which

 

restrict chemical content in electronic products. These systems include standard operating procedures that ensure that restricted

 

substances are not utilized in our manufacturing operations, laboratory analytical validation testing, and an internal auditing process 
to ensure that all standard operating procedures are complied with.

2.1.4

China Requirements — China RoHS 2

China RoHS 2 refers to the Ministry of Industry and Information Technology Order No. 32, effective July 1, 2016, titled Management 
Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products. To comply with China RoHS 2, 
we determined this product's Environmental Protection Use Period (EPUP) to be 20 years in accordance with the 

Marking for the 

Restricted Use of Hazardous Substances in Electronic and Electrical Products,

 SJT 11364-2014.

中国电器电子产品有害物质限制使用管理办法

(Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic 
Products _ China RoHS)

产品中有害物质的名称及含量

(Name and Content of the Hazardous Substances in Product) 

Table 1  Hazardous Substances

部件名称

Part Name

有害物

Hazardous Substances

Lead

(Pb)

汞 

Mercury

(Hg)

Cadmium

(Cd)

六价

Hexavalent 

Chromium

(CF (VI))

多溴

Polybrominated

biphenyls (PBB)

多溴二苯

Polybrominated

diphenyl ethers 

(PBDE)

印刷

电路板组

PCBA

X

O

O

O

O

O

机壳

Chassis

X

O

O

O

O

O

本表格依据 

SJ/T 11364 

的规定编制。

This table is prepared in accordance with the provisions of SJ/T 11364-2014

O

:表示该有害物质在该部件所有均质材料中的含量均在 

GB/T 26572 

规定的限量要求以下。

O:    

Indicates that the hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of 

       GB/T26572.

X

:表示该有害物质至少在该部件的某一均质材料中的含量超出 

GB/T 26572 

规定的限量要求。

X:

    Indicates that the hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit 

        requirement of GB/T26572.

20

Summary of Contents for ST300MM0048


























































Reviews:

Related manuals for ST300MM0048