7
ANSI-Z21.41 • CSA 6.9. In addition, adequate means must be provided to limit
movement of the appliance without depending on the connector and the
quick-disconnect device or its associated piping to limit appliance movement.
Attach the restraining device at the rear of
the range as shown in Fig. 1.
Remove two screws from the rear of the range and install the tie-down strap
shipped with the casters using these screws (Fig. 1). Attach the gas line strain
relief to the tie-down strap at the rear of the range (Fig. 1).
If disconnection of the restraint is necessary, turn off the gas supply before
disconnection. Reconnect this restraint prior to turning the gas supply on and
returning the range to its installation position.
Separate instructions for installing casters to the range are included with the
casters.
Note: If the range is installed on casters and is moved for any reason, it is
recommended that the range be leveled front to back and side to side.
