Seagate IronWolf Pro v6 Serial ATA Product Manual, Rev. C
20
Dispute Resolution.
The parties will attempt to resolve any dispute arising out of or related to these Program Terms or any data recovery services
requested or attempted hereunder through good faith negotiation. To the extent permitted by applicable law, if the parties are
unable to resolve the dispute through good faith negotiation, then the dispute will be submitted to final and binding arbitration
with the Judicial Arbitration and Mediation Services. Each party will bear its own costs in arbitration, provided that Seagate reserves
the right, in its discretion, to pre-pay certain fees you may incur in connection with the arbitration subject to refund if you do not
prevail.
Both parties waive their rights to a jury trial.
All proceedings will take place in Santa Clara County, California, USA. The
laws of the State of California will exclusively govern these Program Terms and our provision of any data recovery services, without
regard to California's conflicts of laws rules. You consent to the exclusive jurisdiction of the courts located in Santa Clara County,
California, USA.
Severability.
If any provision of these Program Terms is held invalid, illegal or unenforceable, such provision shall be enforced to the fullest extent
permitted by applicable law and the validity, legality and enforceability of the remaining provisions shall not be affected thereby.
Legal Effect.
These Program Terms describe certain legal rights. You may have other rights under applicable law. These Program Terms do not
change your rights under applicable law if such laws do not permit these Program Terms to do so. Also, the Program and these
Program Terms are in addition and unrelated to any rights you may have under a Seagate warranty statement.
SRS Companies.
The following SRS companies may provide the services described in these Program Terms:
(a) Seagate Technology LLC, with offices at 3101 Jay Street, Suite 110, Santa Clara, California 95054;
(b) Seagate Technology Canada Inc., with offices at 2421 Bristol Circle, Suite A100, Oakville, Ontario, Canada L6H 5S9;
and/or
(c) Seagate Technology (Netherlands) B.V., with offices at Koolhovenlaan 1, 1119 PA, Schiphol-Rijk, The Netherlands.
2.11
Agency certification
2.11.1 Safety certification
These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify
agency.
2.11.2 Electromagnetic compatibility
Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic
Compatibility Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the levels specified by the product
standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are
defined by EN 55024.
Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in
the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a
properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer
manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.
