Installing the rackmount railkit
51
Figure 38 Location for cage nut near top of allocated 4U space
5.
Repeat the entire procedure for the left outer rail assembly.
Attaching the inner rails to the storage enclosure
You must correctly attach the inner rails to the storage enclosure to bear the weight of its contents.
Required equipment
Qty
Identification
Inner rails, properly oriented
2
N/A
T10 Torx screwdriver, 6-in length
1
N/A
M3 low profile screws, 05x2.75-in length
10
#2 Phillips-head screwdriver, 6-in length
1
N/A
Panhead screw, M4x4mm length
2
CMA A bracket
1
