Seagate Elite 9, Product Manual

Page: 13 / 82

Elite 9 Product Manual, Rev. C 3
2.0 Applicable standard and
reference documentation
Seagate takes all reasonable steps to ensure that its products are certifiable
to currently accepted standards. Typical applications of these disc drives
include customer packaging and subsystem design.
Safety agencies conditionally certify component parts, such as the Elite 9
disc drive, based on their final acceptability in the end-use product. The
subsystem designer is responsible for meeting these conditions of accept-
ability in obtaining safety/regulatory agency compliance in their end-use
product and certifying where required by law.
2.1 Standards
The Elite 9 disc drive is a UL recognized component per UL1950, CSA
certified to CSA C22.2 No. 950-M89, and VDE certified to VDE 0805 and
EN60950.
The Elite 9 disc drive is supplied as a component part. It is the responsibility
of the subsystem designer to meet EMC/regulatory requirements. Engineer-
ing test characterizations of radiated emissions are available from the
Seagate safety department.
2.2 Applicable reference documents
Elite 9 Installation Guide
Seagate part number: 83328850
SCSI-2 Interface Product Manual (volume 2)
Seagate part number: 77738479
ANSI small computer system interface (SCSI) documents
ANSI X3.131-1986 (SCSI-1)
X3T9.2/86-109 Rev. 10H (SCSI-2)
X3T9.2/91-010 Rev. 10
(SCSI-3) Parallel Interface
In case of conflict between this document and any referenced document, this
document takes precedence.