13
Revision 2.EL950 1.3.1074C 18.6
DISPLAY
The LCD Display (Fig. 9) is a two line, 20 character text display panel located on the front of your vending
machine. The display interacts with the customer to show the amount of money entered into the vendor
and the cost of their selection among other information as programmed. The display also shows the
operator the Service Mode functions for setting the vendor.
Fig. 9 – LCD Display in Sales Mode
Date and Time are always displayed on the second line in Sales Mode. If a calorie value is set for a
selection, the value will be displayed when the product is vended or when a selection is made without
any credit.
SERVICE MODE
The operation of the machine can be adjusted by entering service mode by pressing the MENUS button
on the VMC circuit board and then accessing the appropriate operation. Price setting, audit display and
operating modes can be read and adjusted from here. The user can also perform tests on the machine
through this mode. Note: any Credit will be cancelled on entry to Service Mode.
Display Formats
When in Sales Mode Display Reads
Normal Operation, no credit available
WELCOME Please insert cash and make
your selection..;
Normal Operation, some credit available
$00.01 – 99.99
After Pressing a selection, if there is no credit or the
credit is less than the selection’s price, the price of
the selection is displayed for a few seconds before
reverting to one of the above credit display formats.
(If a coin or other payment is made the display re
-
verts immediately to display the credit available)
Price $00.01 – 99.99
Free Vend Mode (all prices set to zero)
Free Vend
If a selection is out of stock when a selection is
pressed – this is displayed for a few seconds
Sold Out
All Items out of stock
Sold Out
Machine Out Of Order
Out of Order
During a Vend (Progress bar, dashes)
--------------
Exact Change required
Exact Change Only
Temperature Display Press the # button to display
Temp nnF (C)
