background image

Sonarmite/SonarM8 User Manual 

Introduction

 

The Sonarmite and HydroLite-TM were designed to be an ultra-portable survey-grade, 
self-contained bathymetric survey system. The internal battery, blue tooth and easy 
integration make it most popular with Survey and Engineering companies. 

Seafloor Systems partnered with Ohmex UK back in 2006 while we were asked to build a 
replacement survey kit for the US Army and Navy dive teams. The Sonarmite was the 
perfect fit for our HydroLite-TM kit at the time. We cut the Army's system down from 3 
cases to one pelican case; also the ease of operation was appreciated.   

As time went on we began building the systems in our Northern California facility 
upgrading as we went. Today's system has longer battery life, stronger blue tooth, Mil-
spec connectors and caps and much more. Thanks to Hypack, Trimble, Carlson, Leica 
and Topcon for writing drivers to make logging easy for our customers, this has really 
boosted popularity and sales worldwide. We now build all of the systems for North and 
South America as well as other Continents.     

 

Equipment Supplied

 

• Sonarmite BT Echosounder  
 

- Internal Battery 

 

- Bluetooth  

 

- IP67 Weatherproofing 

 

- MILSPEC connectors and caps 

Summary of Contents for SonarM8












Reviews: