Section 01 ENGINES (1503 4-TEC)
Subsection 02 (INTAKE MANIFOLD AND SUPERCHARGER)
1
R1503motr364A
A
1. Outlet hose distance
A. 3 - 7 mm (0.12 - 0.27 in)
Supercharger
Supercharged Engines
CAUTION:
Every time when supercharger shaft
has been removed, both ball bearings have to
be replaced.
CAUTION:
Both ball bearings have to be in-
stalled with cages facing supercharger impeller
side.
Apply enough engine oil on ball bearing. Install ball
bearing on supercharger shaft by using support
plate (P/N 529 035 947) to hold bearing.
529035947
CAUTION:
Ensure to position ball bearing
against protrusion of support plate for the in-
stallation. This way, the installation pressure
will be applied to the inner race and will not be
transmitted to the bearing balls which would
otherwise shorten the bearing life.
CAUTION:
To install ball bearings and super-
charger shaft always use a press, never use any
beating force like a hammer.
4
3
1
F00B2FA
2
1. Supercharger shaft
2. Ball bearing
3. Bearing support plate
4. Protrusion of support plate on this side (underneath inner race)
Apply enough engine oil on ball bearing. Press in
the ball bearing in supercharger housing half (en-
gine side), by using ball bearing support/pusher
(P/N 529 035 950).
529035950
1
F00B2EA
1. Bearing support/pusher
22
SMR2005-033
www.SeaDooManuals.net
