4–TEC SC Models
UNCRATING
UNCRATING
Crate Cover
1
2
2
F00A2A6
Carefully lay the crate on its bottom.
CAUTION:
Allowing the crate to drop may cause
serious damage to the watercraft.
Using a drill or a screwdriver, remove all screws
[[[[1]]]] retaining crate cover to crate base.
Assisted by another person, lift up crate cover [[[[2]]]].
N
N
N
NO
O
O
OT
T
T
TE
E
E
E::::
Do not tip cover toward the front or back of
the watercraft. Raise cover vertically [[[[2]]]] from both
ends at the same time.
Remove parts from the watercraft’s rear storage
compartment.
Lifting the watercraft
1
3
2
F08A056
Cut strapping at watercraft front eyelet.
Release [[[[1]]]] the shipping bracket [[[[2]]]] at the rear of
the watercraft from the crate base [[[[3]]]].
Lift the watercraft using the appropriate lift kit and
install it on a proper support.
Shipping Bracket
1
3
2
F08A066
Remove the shipping bracket [[[[1]]]] from the venturi.
Discard the shipping bracket and the hexagonal
bolts [[[[2]]]].
Keep the flat washers [[[[3]]]].
Predelivery
2004-1
3 / 15
