SeaDoo 2006 GTI, Shop Manual, Page: 452 / 801

Section 08 ENGINE MANAGEMENT (4-TEC)
Subsection 03 (DIAGNOSTIC PROCEDURES)
Always OFF
2 second beep every 15 minutes
2 second beep every 58 seconds
2 second beep every 5 minutes
Always ON (continuously beep)
BEEPER PATTERN
BEEPER
CODE
5
4
2
NOTE
6
15
2 SEC.
15 MIN.
58 SEC.
ON
OFF
2 SEC.
2 SEC. 5 MIN.
ON
OFF
ON
OFF
ON
OFF
ON
OFF
F18R0GS
VCK (VEHICLE
COMMUNICATION KIT)
The VCK (Vehicle Communication Kit) (P/N 529
035 981) is the primary tool to diagnose engine
management and fuel injection related problems.
NOTE: The MPEM programmer does not work on
4-TEC models.
The 4-TEC naturally aspirated and supercharged
models require B.U.D.S. version 2 or above.
NOTE: For 4-TEC inter-cooled models B.U.D.S.
version G 2.1.1 is required.
B.U.D.S. (Bombardier utility and diagnostic soft-
ware) is designed to allow among other things,
the programming of safety lanyard(s), entering
customer information, engine monitoring, allow-
ing actuators, sensors and electronic equipments
inspection, diagnostic options and reset such as
the closed throttle and idle actuator.
For more information pertaining to the use of the
software B.U.D.S., use its help which contains de-
tailed information on its functions.

WARNING
If the computer you are using is connected
to the 110 Vac power outlet, there is a poten-
tial risk of electrocution when working in con-
tact with water. Be careful not to touch water
while working with the VCK.
smr2004-Complete Line Up
443
www.SeaDooManuals.net