16
INSTALLATION OF THE CHROME PLATED SHAFT COVER
HYDRAULIC SLOW-DOWN ADJUSTMENT
(ON DEMAND FOR FULL TANK AND FULL TANK LARGE ONLY)
NOTE:
The hydraulic slow-down will take effect in the last 10/15 degrees of the closing process
- Unscrew and remove the manual release as shown in Fig. 30
- The slow-down speed is adjustable by rotating the screw for brake regulation:
To increase the slow-down speed rotate anti-clockwise; To decrease the slow-down speed rotate clockwise
CAUTION: REMEMBER to check the correct setting of the electronic slow-down on the control unit
SCREW FOR BRAKE ADJUSTMENT
Only on Full Tank or Full Tank Large
with adjustable brake models
Fig. 30
Fig. 32
Fig. 31
-
+
p
ee
s
d
n
in
w
o
cl
d
o
w
si
o
n
l
g
S
Use a screwdriver
to adjust
A
Fig. 29
MINI TANK - HALF TANK
HALF TANK LARGE
FULL TANK
FULL TANK LARGE
Make sure to
have inserted the
anti-vibration plastic
frame
« A »
before
inserting the shaft
cover extrusion as
shown in Fig. 28
Fig. 28
