OWNER
’
S MANUAL
(
SEA ISUZU FSR/FSD EV)
SEA-OWS-QA-004/5
ISSUE DATE:
30/05/2020
Page
46
of
56
Charging Procedure (Two-LED Function)
6
Ensure that the wall socket is
safely locked into the wall plug
by rotating the orange locking
mechanism.
A clockwise rotation will
lock the socket into the
plug.
7
Turn the wall plug ON.
Prepare the EVSE (Electric
Vehicle Supply Equipment) for
connection to 3 phase power
supply outlet.
The EVSE is supplied by SEA
Electric as illustrated.
Inspect the charging cable for
any damage prior to use:
- Cut or chafing
- Kinking or swelling issues
- Exposed wiring
- Damaged pins, plugs, caps
- Signs of water intrusion
- Signs of shorting
Check that the wall plug is in
the OFF position.
Wall plug specification
must be:
- 3-Phase
- 5 pin
- 32Amp
C
h
ar
ge
r
P
lu
g-
in
P
ro
ce
ss
Page
0
Issue Date
AS/NZ Trucks
Rev
Variation
SEA-Drive®
Connect the charger (wall-side
socket) to the wall plug.
2
3
4
5
Park the vehicle safely next to
the charging point.
Put the Gear Selector to "N"
position and apply Park Brake,
to prevent any potential
movement.
The vehicle's charging inlet
is located on the
component box at the side
of the vehicle.
Turn the vehicle ignition OFF.
Remove the key to secure the
vehicle.
SEA-Drive® Charging Procedure (Two-LED Function)
In order to ensure maximum efficiency is delivered by your SEA-Drive® system, it is highly recommended that
batteries are placed on charge prior to depleting beyond 10% and that they charged to full state of charge.
Apr 2020
1
Note
Photo
Step
Phase
Safe Operating Procedure
Instruction
SOP NO.
Model
1 / 4
SOP-SD-006
