OWNER
’
S MANUAL
(
SEA ISUZU FSR/FSD EV)
SEA-OWS-QA-004/5
ISSUE DATE:
30/05/2020
Page
16
of
56
5- Charging the Traction Batteries
Specification of Charge Facility:
•
IEC 62196 Mode 2/3 Charging
•
32A, 400VAC
•
3-phase with neutral and earth
•
22kW
Warning
➢
Portable charger should not be left somewhere exposed to moisture due to no completely sealing cap
on the connector part.
➢
If moisture remains on the connector of
EVSE (Electric Vehicle Supply Equipment), it may cause fuse
trip as well as charger damage.
➢
Charger equipment should be kept into the isolated box or in the CAB.
The SEA-Drive® vehicle is recharged by connecting the approved wall or portable charger to the truck
charging point.
See Appendix B at the end of manual as SEA-Drive® wall charger requirements.
•
Park the vehicle safely within reach of a wall socket with the above specification.
•
Turn the ignition key to the OFF position.
•
Connect the charge cable between the vehicle and the EVSE.
•
EVSE will switch on automatically and the charger cable will be locked in the charge socket.
Connector of EVSE
