Ø
Open carefully the package, making sure
not to loose parts which are listed in fig. 3
Ø
Attach the rear oscillating bracket as shown
in fig. 9
Attention
: Do not use a hammer for the
insertion of the short brass pin; its fitting into
the bracket and clevis attachment must be
done by the simple pressure of the hands.
Attention:
Do not incline the hydraulic
operator further than the allowed angle of the
oscillating bracket (1), risks the possible
braking of it.
INSTALLATION OF THE OSCILLATING REAR BRACKET
18
Fig. 8
Fig. 9
Adjustable rear bracket (with screws)
(Accessory on demand)
INSTALLATION OF REAR BRACKET
According to the type of opening that you have chosen
(inside or outside) and to the chosen leaf rotation (see
pag. 5), the rear bracket must first be cut respecting the
quote “a” on pag. 5 and then welded as in fig. 10.
The support must be positioned so that the operator is
perfectly levelled (Fig. 10, Fig. 12)
Fig. 10
Fig. 11
(1)
98 m
m
8
5
mm
55 mm
m
65
m
MINI TANK
MARK TANK
Automazione Porte
e Cancelli
REV 01 - 07/2006
