Sea Recovery Aqua Mini 170, Owner'S Manual

Page: 29 / 170

Chapter
4
System Installation Precautions and Information
Special Considerations
1. Length of Connection Lines:
• All connection lines should be as short and straight as possible using minimum fittings.
Increased length causes line-loss in the Feed Water line.
Increased length causes excessive pressure build up in the Brine Discharge line.
Increased length causes excessive pressure build up in the Product Water line.
• The connection lines must not be “kinked”.
Kinks in the Feed Water line cause cavitation and continual System shut down.
Kinks in the Brine Discharge line cause excessive pressure build up and damage.
kinks in the Product Water line cause excessive pressure build up and damage.
2. Accessibility
• This is a simple rule: Install the system and it’s supporting components in an accessible manner. The Aqua
Mini system requires regular operator maintenance such as filter element changing. As with any Electro
Mechanical system utilized in the Marine environment the Aqua Mini system will require repair from time to
time. Hidden or out of reach items may become forgotten, not maintained, and cause damage to other system
components.
• The Electrical Control Panel Touch Pad and the Back Pressure Regulator must be accessible for starting,
stopping, and adjusting pressure of the system.
Storage Prior to Uncrating
1. Adhere to crate markings
• DO NOT store in direct sunlight;
• DO NOT store above 120 degrees F / 50 degrees C;
• DO NOT freeze;
• DO NOT store longer than 4 months without flushing with storage chemical;
• STORE ONLY on base with ARROWS UP.
Uncrating
1. DO NOT DISCARD ANY PACKAGING UNTIL YOU HAVE FOUND AND IDENTIFIED ALL PARTS!
2. Remove the Aqua Mini system from the shipping carton.
3. Some of the components are loose or separately packaged in the shipping container.
4. Refer to the prior two pages illustrating the contents of the System.
27