2
3
4
5
1
24VDC
X3
X4
Install the Remote Transformer
Mount the transformer to a solid surface using the
keyhole slot on the mounting bracket (hardware not
included).
Remove the transformer cover by loosening the two
Phillips screws on the side of the transformer.
TRANSFORMER
BRACKET
TRANSFORMER
BRACKET
PHILLIPS
SCREW
TRANSFORMER COVER
24VDC
CONNECTOR
WIRES
Install a conduit connector and bring the low-voltage
connector wires from the fixture to the remote
transformer.
Insert both red low-voltage wires into the terminal
marked " " (positive) and tighten the screw firmly.
Insert both black low-voltage wires into the terminal
marked " " (negative) and tighten the screw firmly.
COM
120V
BOOST
1
2
2
2
1A
1
1B
3
4
5
