Sea-doo GTX Limited iS 255 2009, Shop Manual

Page: 64 / 555

Section 02 ENGINE
Subsection 04 (SUPERCHARGER)
smr2009-025-007_b
1. Camshaft locking tool
Check slipping moment counterclockwise by us-
ing a torque wrench with actual torque viewer. A
mirror is useful to see the viewer.
smr2009-020-004_a
1. Torque wrench
NOTE: Before checking the supercharger slipping
moment on a new or rebuilt supercharger, it is rec-
ommended to turn the clutch for a minimum of 3
complete revolutions. This will dissipate grease or
oil on the titanium shims for a precise reading.
Supercharger should start to turn at a torque
within the specified values.
SLIPPING MOMENT (NEW SUPERCHARGER)
9 N•m to 17 N•m (80 lbf• in to 150 lbf• in )
SLIPPING MOMENT (BREAK-IN SUPERCHARGER)
8 N•m to 12 N•m (71 lbf• in to 106 lbf• in )
If the torque is not within specifications, repair
supercharger clutch. Verify supercharger clutch
components as per
SUPERCHARGER INSPEC-
TION
in this subsection.
SUPERCHARGER CLUTCH
SLIPPING MOMENT (BENCH
TEST)
Mount supercharger on the
SUPPORT PLATE
(P/N 529 035 947)
.
529035947
Use the
SUPERCHARGER GEAR HOLDER (P/N 529
036 025)
to retain supercharger gear while measur-
ing slipping moment.
529036025
smr2006-074-101
Check slipping moment counterclockwise by us-
ing a torque wrench with a viewer.
smr2009-020
41