Sea-doo GTX Limited iS 255 2009, Shop Manual

Page: 13 / 555

INTRODUCTION
INTRODUCTION
This shop manual covers the following BRP made 2009 Sea-Doo watercraft models.
MODEL COLOR ENGINE MODEL NUMBER
GTX Limited iS Topaz mist metallic 1503 HO (255 HP) 189A, 189B
RXT iS Bright yellow 1503 HO (255 HP) 349A, 349B
The information and component/system descrip-
tions contained in this manual are correct at time
of writing. BRP however, maintains a policy of
continuous improvement of its products without
imposing upon itself any obligation to install them
on products previously manufactured.
Due to late changes, there may be some differ-
ences between the manufactured product and the
description and/or specifications in this document.
BRP reserves the right at any time to discontinue
or change specifications, designs, features, mod-
els or equipment without incurring obligation.
VEHICLE INFORMATION
HULL IDENTIFICATION NUMBER
(H.I.N.)
The hull identification number is composed of 12
digits:
YDV 12345 L 4 95
Model year
Year of production
Month of production
Serial number (a letter may also be used as a digit)
Manufacturer
It is located on footboard at the rear of watercraft.
smr2009-011-001_a
1. Hull Identification Number (H.I.N.)
ENGINE IDENTIFICATION
NUMBER (E.I.N.)
The Engine Identification Number is located on
front end of the engine.
F18D03A
1
1. Engine Identification Number (E.I.N.)
WORKING ON WATERCRAFT
To work on watercraft, securely install it on a
stand. Thus, if access is needed to water inlet
area, it will be easy to slide underneath water-
craft.
The
LIFTING STRAP (P/N 529 036 171)
MUST be
used to install watercraft on a stand.
NOTICE
Using any other lifting strap kit than
the recommended one will cause damages to
the vehicle. Bumpers will be tear off and their
replacement will be required.
X
smr2009-011