3/9/2017
einstructiondetails
http://instructions.brp.com/content/instructionsheet/en_CA/einstructiondetails.html#articleNo=kA0a0000000l0rxCAA&lang=en_CA&title=SEADOO%20KIT…
1/16
SEADOO KIT Depth Finder
Part number (SKU) : 295100679
Product:
SeaDoo_watercraft
Project no:
487802049
Instruction Sheet P/N:
487802049
Revision no:
Revision date:
Item covered:
Depth Finder (Kit P/N : 295100679)
PRIOR TO INSTALLATION, PLEASE VERIFY IF A REVISED VERSION OF THIS INSTRUCTION
SHEET IS AVAILABLE ON KNOWLEDGE CENTER.
The following symbols may be used in this document:
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a hazard situation which, if not avoided, could result in minor or
moderate injury.
NOTICE
Indicates an instruction which, if not followed, could severely damage vehicle
components or other property.
WARNING
For safety reasons, this kit must be installed by an authorized BRP dealer.
This kit is designed for specific applicable models only (authorized BRP dealers will confirm
model(s)). It is not recommended for units other than the one (those) for which it was sold.
This instruction sheet MUST be given to the purchaser.
Should removal of a locking device (e.g. lock tabs, selflocking fasteners, etc.) be required
when undergoing disassembly/assembly, always replace with a new one.
Torque wrench tightening specifications must be strictly adhered to.
NOTE: The illustrations in this document show typical construction of the different assemblies and
may not reproduce the full detail or exact shape of the parts; however, they represent parts that have
the same or similar function.
Installation time is approximately 1.0 hour.
PARTS TO BE INSTALLED
Item
Description
Part Number QTY
